Canopy Materials

[Dragonreef202]

Hello I was thinking about building a canopy to hang my lights on my tank. I was wondering after the canopy is built what should I do about the salt which may ruin the inside of the canopy over time?

 

[cromag27]

just use high quality latex paint on the inside.

 

[gilman]

I made my canopy out of aluminum angle I get at home depot . It doesnt rust from the salt water .

My stand is metal also . I take patterned wall panel and tape magnets to it to cover the stand and canopy .

 

[Dragonreef202]

ok i'll look into that at home Depot

 

[|sCRIBe|]

Been looking for ideas to make a hood/canopy and I like what you have. Could you post more details and be more specific on this build?

 

[sergifed91]

I built mine out of plywood and 1x2 furring strips. then to coat it. I used 2 coats of Danish oil and then 2 coats of Minwax Helmsman Semi-gloss Oil-based Spar Urethane Varnish.

I used this, https://www.lowes.com/pd/Rust-Oleum-Danish-Oil-Actual-Net-Contents-16-fl-oz/1000535823

and this, https://www.lowes.com/pd/Minwax-Hel...arnish-Actual-Net-Contents-32-fl-oz/999913677