CaRx media, why am I seeing high alk?

  • Thread starter Thread starter HuduVudu
  • Start date Start date
  • Tagged users Tagged users None

HuduVudu

2500 Club Member
View Badges
Joined
Jun 2, 2020
Messages
3,241
Reaction score
3,452
Location
Houston
What state or country do you live in
Texas
Rating - 0%
0   0   0
@Randy Holmes-Farley when I dumped the plenums the alk went down and then back up. Upon further investigation, I have determined it is the CaRx media.

General question ...
I am using live rock rubble from Walt Smith rock as CaRx media, and my assumption is that is from Fiji. I have a ton so it makes sense, my assumption is that it is balanced. I question that assumption now. Why would this rock produce such a high alk in comparison with calcium? Or maybe my balance was out of whack and it is producing appropriately? I added a Kalkwasser reactor to the tank and left the reactor to run. The alk went to 11.2 dKh the calcium was at 360ppm previously it was 10.2 dKh and 350ppm. When I let just the Kalkwasser reactor run and turned off the CaRx I got 10.2 and 340.

I have ReBorn on order, not sure if this will solve my dilema but thoughts would be helpful. Does the CaRx media make that big of a difference?

@jda
 
I suspect the calcium kit is just not good at registering the 7 ppm rise that would be associated with a 1 dKH alk rise.
 
The media type cannot make much difference except to the magnesium added in place of a small fraction of the calcium.
 
I suspect the calcium kit is just not good at registering the 7 ppm rise that would be associated with a 1 dKH alk rise.
So your position is that the alk calcium is being maintained and that the previous difference is being carried over?
 
The media type cannot make much difference except to the magnesium added in place of a small fraction of the calcium.
I am using the 2 little fishies Reborn magnesium in the reactor. I am not really getting much mag out of it. My reactor is running 7.2 pH (Hanna), this doesn't seem like it is enough to get a real melt on the mag.

I have been using magneisum carbonate that I use vinegar to dissolve to bring up my mag which was pretty low (1020ppm) to currently higher (1200ppm). Not sure if the acetate is causing a alk rise. I doesn't seem like it because I have paused for a couple days to let the acetate to break down and see if I get anything.
 
The Walt Smith rock you are using, is the artificial type made with concrete? I thought he was known for being the first proponent of using man made rock made out of concrete.
 
So your position is that the alk calcium is being maintained and that the previous difference is being carried over?

I’m just suggesting the calcium kit is not accurate and precise enough to detect a lack of calcium delivery over this time period.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new