Hi Reefers,
I am experiencing issues with my Clarisea SK-3000 filter roller - maybe someone here can help?
The unit is assembled as per the manual with all parts in good condition.
Alarm code:
“Blue and Red light flashes 5 times and short audible alarm beeps five times when the advance button is pressed”
Suggested error from Clarisea manual:
There is a potential short circit in the motor power.
What i have so far:
1. All above steps
No changes to condition
2. Unit restarted
After this, manual push button as well as float gauge activation works for a couple of hours
3. Unit cleaned
No changes to condition
4. Paper pulled through manually
Confirmed no obstruction to the roll, it pulls through easily
5. Replace motor x 2
No changes to condition
6. Fully close by-pass
No changes to condition
I am experiencing issues with my Clarisea SK-3000 filter roller - maybe someone here can help?
The unit is assembled as per the manual with all parts in good condition.
Alarm code:
“Blue and Red light flashes 5 times and short audible alarm beeps five times when the advance button is pressed”
Suggested error from Clarisea manual:
There is a potential short circit in the motor power.
- Check that the wires have not been pulled out the back of the motor.
Checked - All okay
- Check that there is no water in the connection between the controller and the motor.
Checked - All dry and in good condition
- Disconnect the motor connection from the controller and press the play button, if the blue light flashes and controller beeps once the controller is funtioning normally. Re-connect the motor and press the play button, if the original alarm code is repeated there is a short circuit in the motor.
Checked - Normal functionality when motor not connected
What i have so far:
1. All above steps
No changes to condition
2. Unit restarted
After this, manual push button as well as float gauge activation works for a couple of hours
3. Unit cleaned
No changes to condition
4. Paper pulled through manually
Confirmed no obstruction to the roll, it pulls through easily
5. Replace motor x 2
No changes to condition
6. Fully close by-pass
No changes to condition