Learned a valuable lesson this week. First of all, I have a 25 gallon rodi drum that I mix fresh salt water in. Every week I bring it out of the garage and let my saltwater mix next to the tank for 24-48 hours, do the change, and put it back. I usually just stuff the plastic tubing and maxijet that I use for mixing into the empty drum. The previous week I had left about 1/2 inch of water in the drum. When I plugged in the maxijet, the plug was dry but it had just a slight bit of corrosion on the metal. I didnt think anything of it and continued to mix the water. The corrosion kept nagging at me, so I asked around. Apparently the plugs are made from zinc which leeches copper when corroding! I held onto the water until I could get my hands on a copper test kit. The water in the drum miraculously tested 0 for copper, but it could have been bad- real bad. Lesson learned.
