Compatability between eco 6105 with old controller and the new hub controller

[liam]

Hi Roger
I have 2 6105 eco streams with the old controller and am considering adding 2 more to my system. What are my options as far as linking the new 6105 with the hub controller together and my older pumps,I have ghl profilux 4 .Are the 6105 ecos I already have upgradable to the new controller? Can they be linked via cable? Or via profilux.thanks Liam.

 

[rvitko Verified Sponsor]

You can connect the older to pumps to retrofit controllers when they become available, these are specifically designed to retrofit older pumps.

https://www.tunze.com/US/en/details/7020.150-turbelleR-controller-7020-upg-1.html

 

[minus9]

You can connect the older to pumps to retrofit controllers when they become available, these are specifically designed to retrofit older pumps.

https://www.tunze.com/US/en/details/7020.150-turbelleR-controller-7020-upg-1.html

Any update when they’ll be released?

 

[rvitko Verified Sponsor]

I have nearly 20 of them in stock, you can order one now, ignore out of stock on Tunze.com, it means nothing except they don't have them boxed and ready to go that day at the factory and US orders ship from the US.

 

[minus9]

I have nearly 20 of them in stock, you can order one now, ignore out of stock on Tunze.com, it means nothing except they don't have them boxed and ready to go that day at the factory and US orders ship from the US.

Oh nice! These will work with the 6040’s, right?

 

[rvitko Verified Sponsor]

Yes.

 

[minus9]

Yes.

Great! I thought so, but just wanted to make sure. Tunze is awesome for doing this!

 

[crs751]

I have (4) 6055's on my 75G SPS tank. Probably overkill but they work great and provide high flow and are bulletproof. The only thing I find somewhat problematic is that the controller is permanently attached to the pump so after you remove the power you have to remove the controller along with the pump to clean the pump. Does that new eco equipment provide any solution to this issue by making the motor unit detachable from the controller or is this not possible under any configuration? Sorry if this highjacks the initial poster's thread.

 

[spsick]

I have (4) 6055's on my 75G SPS tank. Probably overkill but they work great and provide high flow and are bulletproof. The only thing I find somewhat problematic is that the controller is permanently attached to the pump so after you remove the power you have to remove the controller along with the pump to clean the pump. Does that new eco equipment provide any solution to this issue by making the motor unit detachable from the controller or is this not possible under any configuration? Sorry if this highjacks the initial poster's thread.

Yes they have a disconnect plug from the controller.

 

[crs751]

Thanks for the reply. Is that part on their website?

 

[Mellotang]

Is there a multi controller option for the new Eco streams? Or are the new eco controllers capable of being synced?

 

[rvitko Verified Sponsor]

If you retrofit the new controller, it unfortunately keeps the same, unplugs inside the controller system, but on brand new pumps, the pump disconnects outside, this covers most of these details-



You can link all your pumps on TunzeHub and tether them to work together or set them all individually, if you don;t want to use the cloud interface, you can manually tether 2 pumps with jack plugs, this video explains this in more detail.