Condensing power bricks/outlets

mjw011689 · Tuesday at 8:54 PM

I’m looking for ways to eliminate plugs/power bricks to free up outlet space. I have a hydros wave engine that currently runs 3 of my wave makers, so that eliminates 2 outlets/power bricks needed, but is there something that can power multiple devices besides the wave engine? I have some off brand pumps, and a couple lights that id like to condense to one power source if possible, because id like to add some dosing pumps down the road and I’m out of outlet space. Aside from just getting a larger power strip, are there any realistic options out there?

Currently have 3 blades, return pump, 3 wave makers, heater… ATO, sump light, and I know I’m missing something else here. I just set up another tank right next to this one and I’m going to have 3 lights on that, along with 2 wave makers, possibly a need for couple other things.

Also, yes, I have confirmed the current draw is still far under the breaker and outlet ratings.

Gumbies R Us · 2026-07-30T09:42:16-0400

@Troylee

Shinji Ayanami · 2026-07-30T09:58:30-0400

in the Homelab w

orld. a cheap way of getting compute is with a series of compact computas called tinyminimicros. but they each have a brick and you normally run them in a cluster. so 5 bricks. some even go up to 10. but recently a guy has developed a PSU to eliminate them. idk if it will help you but a good place to start.

https://shrikelab.co/

Also a quick flex of my lab

‍

BriDroid · 2026-07-30T10:00:11-0400

If your power bricks are 12VDC or 24VDC, you can look into a Kraken, since you already have a Wave Engine. I have one and really like it. It isn't cheap, but it does add a battery backup for your pumps as well. If they're 36VDC, then I have no clue. You can even power your Wave Engines off the Kraken to get rid of those power bricks. I have two Wave Engine LE's powered off mine.

Servos · 2026-07-30T13:47:32-0400

In addition to using something like to the hydros kraken already mentioned:
For barrel jack style connections - upgrading to a larger capacity power brick and using splitters is an option. I've opted to do this for things like wavemaker pumps.
For high powered lights, a large capacity meanwell driver is an option. Theres plenty of options with 3 outputs and high wattage rating. Just wire your own leads.

With either option, I like the heavier duty pigtails/splitters - ones that are 14awg to avoid voltage drops or overloading the wire (good for at least 120w).