Confused alk

  • Thread starter Thread starter Dexter_SA
  • Start date Start date
  • Tagged users Tagged users None

Dexter_SA

Community Member
View Badges
Joined
Jan 17, 2019
Messages
74
Reaction score
33
What state or country do you live in
Other International
Rating - 0%
0   0   0
Im having a bit of a issue with my sulphur reactor and alk. I'm not sure what happened but my alk climbed from about 7.8 to 9 and my sps not very happy with me. I am battling to get the alk down to 7.8 again. I run a carx with sulphur reactor. And I dose two part alk seperately to compensate for the alk used by the sulphur reactor. But I'm scratching a bit in the dark. I think what happened is I increased the flow in my sulphur reactor. Would this cause alk to climb? Logically I tried to reduce the two part dosing but it seems if I reduce the two part dosing alk climbs even higher. Please help.
 
If you are compensating for a drop in alk in the reactor, and it stopped consuming alk (wrong flow, nitrate is already mostly down, etc.), then you may be overcompensating now.
 
Is it possible for alk to climb if one increased the effluent drip?
And what I don't understand. Trying to decrease alk. I adjusted the doser to dose less alk. But on the test kit it appeared that alk is increasing. That's the confusing part. Not sure if this make sense
 
Is it possible for alk to climb if one increased the effluent drip?
And what I don't understand. Trying to decrease alk. I adjusted the doser to dose less alk. But on the test kit it appeared that alk is increasing. That's the confusing part. Not sure if this make sense

You increased the water flow through a CaCO3/CO2 reactor? Certainly, that will increase alkalinity dosed if the CO2 is controlled by pH.
 
No... I increased the drip rate of the sulphur reactor. Not the calcium reactor

So I think what happened was. Because the flow was quicker through the sulphur reactor less alk was being consumed. So alk in tank climbed. But that's just my theory.
 
No... I increased the drip rate of the sulphur reactor. Not the calcium reactor

So I think what happened was. Because the flow was quicker through the sulphur reactor less alk was being consumed. So alk in tank climbed. But that's just my theory.

That is possible. :)
 
Thanks for the help as always Randy
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 6.3%
  • I decorate AROUND the tank or stand

    Votes: 2 12.5%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 10 62.5%
  • We don’t decorate for the holidays

    Votes: 3 18.8%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new