I was rinsing using RO and tank water - putting water in, shaking vigorously, repeating probably 3 or 4 times.
I've ordered some new vials (cuvettes?) and I'll see what results I get with those. I'll also try to sterilise the existing vials and see what readings I get.
I tested yesterday with a vial that had completely dried out and got a reading of 10 (0.03). My girlfriend laughed at my obvious joy and told me to test again. I got 60... tested again and got 80... She was rather amused... me, not so much...
I tested a reference solution that should be 0.08 and got 90 (about 0.27). Tried my Red Sea kit and got the light yellow (almost clear) colour and also confirmed the reference solution at 0.08, so I knew the Red Sea kit was giving a correct reading. I then thoroughly rinsed the vial and used a cotton bud on the inside and it came out blue. I then used some tissue paper inside and it still came off blue. Obviously no amount of rinsing was getting it completely clean.
Perhaps after using the vials for quite a few years they are no longer capable of being cleaned properly or they need to be sterilised.