Creeping Salinity Q

  • Thread starter Thread starter authentic
  • Start date Start date
  • Tagged users Tagged users None

authentic

Valuable Member
View Badges
Joined
Sep 20, 2012
Messages
1,483
Reaction score
882
Location
coral springs florida
Rating - 100%
1   0   0
My tank has an issue with creeping salinity,,,,over time it raises from 1.025 to 1.028 at which time I draw water out and let my ato add RO to bring it down.....everything else is stable
175 gal system ,calcium reactor,auto water change ( salinity 1.024 in my storage container ),running kalk in a reactor to supplement the ph,,,ideas?
 
My tank has an issue with creeping salinity,,,,over time it raises from 1.025 to 1.028 at which time I draw water out and let my ato add RO to bring it down.....everything else is stable
175 gal system ,calcium reactor,auto water change ( salinity 1.024 in my storage container ),running kalk in a reactor to supplement the ph,,,ideas?
May be happening from evaporation, but calibrate your salinity tester and see if that makes a difference
 
Have you checked your auto water change recently? If you are using a dual headed pump, sometimes gunk can build up in the waste line, altering the ratio. I had that happen a couple of times in the past and the result was salinity creeping higher. If you are using a dual headed pump, I would suggest measuring the input to the output and seeing if they are still matching.
 
Top off is what?

I agree that lack of exact match of the auto water change volumes may be the issue.
 
Thx I do use a dual headed pump and haven’t checked that in years

In my system, I used to adjust the pump heads independently when I wanted to adjust salinity, but I know that may be hard with a dual head peristaltic pump.
 
Do you have an ato, if so is there rodi and not saltwater in it? I know that too most of us this sounds like the most basic thing, but after running a LFS for years I can attest to the number of times people have been typing off their saltwater tank with saltwater.

I can see OP thinking that his 1.024 water change water is going to keep everything on point without needing to run an auto to off. The issue with this is that the amount of evaporation will change throughout the year and is not a reliable way of keeping a tank stable.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new