Not really new here, but thought I would post some info on my newest setup. This system has been running for about 3 months now. I upgraded from a smaller 50g Oceanic as it was so overcrowded. Even now in the 75g, it's full except for fish.
Everything went smoothly except for the fact that the silicone I used turned out to be no good. After sitting for a week, the baffles in the sump could be moved with a finger. Grainger quickly sent me 2 new tubes, and I once again put the baffles in and built the overflow. heh, silicone was rock solid 2 days after application!
75g Mixed Reef
Internal Weir with the BeanAnimal Drain System
Mag 12 Return
Bubble Magus NAC6
40g Breeder Sump w/14g Fuge
DIY Fixture holding 2x150w Pheonix 14k, LED Accenting
Neptune Apex Controlling everything
So here some images, I'll get some more up later
Everything went smoothly except for the fact that the silicone I used turned out to be no good. After sitting for a week, the baffles in the sump could be moved with a finger. Grainger quickly sent me 2 new tubes, and I once again put the baffles in and built the overflow. heh, silicone was rock solid 2 days after application!
75g Mixed Reef
Internal Weir with the BeanAnimal Drain System
Mag 12 Return
Bubble Magus NAC6
40g Breeder Sump w/14g Fuge
DIY Fixture holding 2x150w Pheonix 14k, LED Accenting
Neptune Apex Controlling everything
So here some images, I'll get some more up later