My friend gave me an acrylic 5 gallon bucket that her compant was throwing out. I thought it would make a nice Betta tank for the kids. After it sat around for a month or so I decided to start to play with it. After that the kids got the Pico for the Betta and I started my new Junk build. So far all parts were trash. I want this to be a skimmerless dirty tank for zoas and chalices. I hope this turns out pretty good. Here is the first pic.
I did the fresh water test over the weekend and made a couple acrylic frag racks. The light is temp and just the return running. I wanted to make sure the structure was sound. Here are a couple Pics
I was unhappy with the first stand pipe so I built a new one.
While in Lowes I discover that 1 1/4" pipe will fit almost tight over the 1" I made a slide to go over the 1" so I cold remove the rock work in one piece if need be.
I did the fresh water test over the weekend and made a couple acrylic frag racks. The light is temp and just the return running. I wanted to make sure the structure was sound. Here are a couple Pics
I was unhappy with the first stand pipe so I built a new one.
While in Lowes I discover that 1 1/4" pipe will fit almost tight over the 1" I made a slide to go over the 1" so I cold remove the rock work in one piece if need be.
