Difference in rms mounts

[a4edwin]

Is there a difference with the x bracket in each of these?
https://www.bulkreefsupply.com/rms-slide-for-xr15-g5-ecotech-marine.htmlhttps://www.bulkreefsupply.com/rms-xr15-g5-adapter-kit-ecotech-marine.html

 

[LuizW13]

I think the bracket themselves are the same, but the adapter kit would allows you to use the Radion gen 5 fixture with the previous versions on the rms mount. So, essentially, if you're upgrading from an older version of the Radion, and still want to use your existing rms mount -You'd buy that adapter kit.

 

[a4edwin]

If that is the case why is the bracket alone more expensive than the bracket with adapter?

 

[Reefer825]

The brackets are the same. They both have notches underneath on both sides. The latter comes with an extra piece that mounts on the end of one of the aluminum extension arm pieces. It comes with the kit when you order the arm kit. The end piece gives it a more finished look when mounting the light. The option is incase your bracket alone needs to be replaced. Not sure why they're charging less for the latter, lol. Buy the latter and save some money .

 

[a4edwin]

The brackets are the same. They both have notches underneath on both sides. The latter comes with an extra piece that mounts on the end of one of the aluminum extension arm pieces. It comes with the kit when you order the arm kit. The end piece gives it a more finished look when mounting the light. The option is incase your bracket alone needs to be replaced. Not sure why they're charging less for the latter, lol. Buy the latter and save some money .

That’s what I was planning on doing. eventually I will be switching over to the a longer tank and will purchase the rms track

 

[Euphyllia098]

That’s what I was planning on doing. eventually I will be switching over to the a longer tank and will purchase the rms track

Did this work out for you?

 

[Reefer825]

Did this work out for you?

I called Ecotec regarding this. Both brackets will fit the Gen4 & Gen5(rep said all xr15 models). The adapter kit allows the Gen5 light to be attached to the previous tank mount system. The G4's for instance slide into the bottom of the arm using a different style bracket as seen in the picture below. If you're looking to save a few bucks for a bracket for your G5 to mount to the G5 arm kit or rail then both work the same. As another member mentioned, it's only for using the newer XR15G5 model on the older tank arm. If you're still unsure, give Ecotech a call. They have great customer service/support IMO.

 

[Euphyllia098]

I called Ecotec regarding this. Both brackets will fit the Gen4 & Gen5(rep said all xr15 models). The adapter kit allows the Gen5 light to be attached to the previous tank mount system. The G4's for instance slide into the bottom of the arm using a different style bracket as seen in the picture below. If you're looking to save a few bucks for a bracket for your G5 to mount to the G5 arm kit or rail then both work the same. As another member mentioned, it's only for using the newer XR15G5 model on the older tank arm. If you're still unsure, give Ecotech a call. They have great customer service/support IMO.

I contacted ecotech and I think the rep either doesn't know or is lying.

I currently have a single arm mount with a xr15 g5. I want to add another light so I want to buy a multi light rail to hang both lights.

I wanted to know if the light bracket I am currently using with the single arm will work on the multi light rail. If so why wouldn't i be able to buy the cheaper bracket for my 2nd light?

To me the rails used in both systems look identical, but the rep said they were different. So I am trying to see if anyone can verify this.

 

[Reefer825]

I contacted ecotech and I think the rep either doesn't know or is lying.

I currently have a single arm mount with a xr15 g5. I want to add another light so I want to buy a multi light rail to hang both lights.

I wanted to know if the light bracket I am currently using with the single arm will work on the multi light rail. If so why wouldn't i be able to buy the cheaper bracket for my 2nd light?

To me the rails used in both systems look identical, but the rep said they were different. So I am trying to see if anyone can verify this.

Yes, I know this for a fact. I have two XR15 G5's with matching (newer) tank mounts. I switched to the rail using the brackets from the kits and they work with the rail! I finally ditched the arms and hung the rail still using the same brackets. The two aluminum arm extensions in the tank mount kit is exactly the same as the aluminum rails.

 

[Euphyllia098]

Yes, I know this for a fact. I have two XR15 G5's with matching (newer) tank mounts. I switched to the rail using the brackets from the kits and they work with the rail! I finally ditched the arms and hung the rail still using the same brackets. The two aluminum arm extensions in the tank mount kit is exactly the same as the aluminum rails.

Thanks, that's what I thought but wanted verification. I still wonder what's in the other kit besides screws that justifies the 10$ price increase.

 

[a4edwin]

Yes they worked for me I’m using them on my gen4’s

 

[a4edwin]

I contacted ecotech and I think the rep either doesn't know or is lying.

I currently have a single arm mount with a xr15 g5. I want to add another light so I want to buy a multi light rail to hang both lights.

I wanted to know if the light bracket I am currently using with the single arm will work on the multi light rail. If so why wouldn't i be able to buy the cheaper bracket for my 2nd light?

To me the rails used in both systems look identical, but the rep said they were different. So I am trying to see if anyone can verify this.

You can buy the cheaper one and it will work. The slider one only comes with the slider and nothing else. The adapter kit come with the slider some screws end the end cap for the arm. And it’s cheaper. I can’t wrap my head around the pricing but what ever. I took some pics they’re pretty dark.

 

[Euphyllia098]

I went ahead and ordered the stuff. Thanks everyone for the feedback.

 

[Jclauserr]

Will this bracket also work for the g6? I assume so. But yeah I still can't wrap my head around it being cheaper

 

[Euphyllia098]

Will this bracket also work for the g6? I assume so. But yeah I still can't wrap my head around it being cheaper

Yes it will. I actually have 1 left that I'm selling and I'll include the screws.

 

[Euphyllia098]

Post in thread 'Tunze Long Care Magnet Scraper, Klir Di4 Filter Roller, Bubble Magus Curve 5, Ecotech RMS Rail, XR15 RMS Mounts' https://www.reef2reef.com/threads/t...ms-rail-xr15-rms-mounts.1150085/post-14216498

 

[Jclauserr]

Yes it will. I actually have 1 left that I'm selling and I'll include the screws.

Just bought 3 online. 20 bucks each with free shipping. Thank you though!

 

[Euphyllia098]

Just bought 3 online. 20 bucks each with free shipping. Thank you though!

You'll need screws as they don't come with any. Just an FYI.