Different kind of build thread - My sump

william Lutman

Old Dead Head, just rolling down the road
View Badges
Joined
Oct 28, 2012
Messages
592
Reaction score
822
Location
Lake Zurich, Illinois
What state or country do you live in
Illinois
Rating - 0%
0   0   0
I have a 60B tank setup for zoa growing. I initially purchased a sump kit for a 20L sump. Because of how the selves on my stand are spaced I needed shallow sump to fit on the 16" shelf, very limited.

Fast forward 8 months and I need more sump space, K1 chamber, GDO reactor, bio pellets, and now I want a roller mat to replace my socks. Still only 16" on the shelf under the tank.

I looked at many used sumps as replacement. Visiting local stores, surfing FB marketplace, and of course R2R. All were either too small or too tall.

I started planning what I would want if I built my own custom sump. I wanted room, same footprint as my 60B and settled on 48x18x12 is what I needed. I started looking for new Plexiglass provider and struck gold.

American Acrylics right here in my hometown - Lake Zurich. I requested a quote through their website, and received a follow-up from Greg DeGreef who filled in pricing and background one their capabilities. Quote put my cost below some nice used name brand sumps I had seen.

Next day Greg sent an invoice which I paid and couple of days later I picked up my Acrylic.

For those who don't know me, back in 2013 - 2016 I built custom sumps, small tanks, and AIO's out of my basement. Supplies all still here. The 50 inch marble counter top with corner missing I bought from Menards closeout section, then there are custom jigs to clamp and hold panels while solvent welds them, clamps in many sizes and lengths, finally routers and blowtorch to make perfect corners

I had an oddly satisfying evening pealing the protective paper from fresh acrylic. On new acrylic the paper comes off slowly but completely in large sheets. Pealing floor, sides, and baffles i'm ready to go.....
PXL_20250813_191624907.jpg
 
Are we going to get a sump crab in this tank?
Important question for sure and it is definitely going to happen. Current sump has it's own CUC and has various types of snails and hermits. 100% of them are going into the new sump. Unfortunately, no sump monsters yet, I put rogue crabs in with my Mantis shrimp
 
I have a 60B tank setup for zoa growing. I initially purchased a sump kit for a 20L sump. Because of how the selves on my stand are spaced I needed shallow sump to fit on the 16" shelf, very limited.

Fast forward 8 months and I need more sump space, K1 chamber, GDO reactor, bio pellets, and now I want a roller mat to replace my socks. Still only 16" on the shelf under the tank.

I looked at many used sumps as replacement. Visiting local stores, surfing FB marketplace, and of course R2R. All were either too small or too tall.

I started planning what I would want if I built my own custom sump. I wanted room, same footprint as my 60B and settled on 48x18x12 is what I needed. I started looking for new Plexiglass provider and struck gold.

American Acrylics right here in my hometown - Lake Zurich. I requested a quote through their website, and received a follow-up from Greg DeGreef who filled in pricing and background one their capabilities. Quote put my cost below some nice used name brand sumps I had seen.

Next day Greg sent an invoice which I paid and couple of days later I picked up my Acrylic.

For those who don't know me, back in 2013 - 2016 I built custom sumps, small tanks, and AIO's out of my basement. Supplies all still here. The 50 inch marble counter top with corner missing I bought from Menards closeout section, then there are custom jigs to clamp and hold panels while solvent welds them, clamps in many sizes and lengths, finally routers and blowtorch to make perfect corners

I had an oddly satisfying evening pealing the protective paper from fresh acrylic. On new acrylic the paper comes off slowly but completely in large sheets. Pealing floor, sides, and baffles i'm ready to go.....
PXL_20250813_191624907.jpg
How did you cut everything? Did you plan out of the pieces you need and they cut it for you? I am local to you and have been interested in redoing my sump but don't have the tools (or skills) for cutting everything.
 
Yes, I found local supplier, I bought my jigs years ago. I built sumps and tanks as a side gig for a couple of years.

I just send cut list, get a quote, and move from there. Where are you located?
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 10 41.7%
  • I’d trust someone who knows my tank to choose

    Votes: 0 0.0%
  • I’d rather get a gift card and pick it myself

    Votes: 9 37.5%
  • I’d prefer gear or supplies instead

    Votes: 0 0.0%
  • Please don’t surprise me with livestock

    Votes: 5 20.8%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new