Digital aquatic dpi help

[zzzdiver]

Must be doing something wrong;
This is how I have it set up
1. PC4 is set to "on"
2. Timer 1 is set to all days of the week
Start is 07:30:00pm
On duration 00:06:00
Off duration 00:54:00
Repeat count 23
Oscillate on
Random no
Saved
3. Dpi set mode auto
Save
Functions multi timer
Timer a- 1
Timer b- 1
In standby on
Standby delay 00:00:00
Default off
Saved
Trying to just see it work, I did get it to run one cycle at timer a-1 set up at 7:00 earlier then tried to reset the timer for the above and it didn't come on. Any ideas?

 

[n2585722]

Must be doing something wrong;
This is how I have it set up
1. PC4 is set to "on"
2. Timer 1 is set to all days of the week
Start is 07:30:00pm
On duration 00:06:00
Off duration 00:54:00
Repeat count 23
Oscillate on
Random no
Saved
3. Dpi set mode auto
Save
Functions multi timer
Timer a- 1
Timer b- 1
In standby on
Standby delay 00:00:00
Default off
Saved
Trying to just see it work, I did get it to run one cycle at timer a-1 set up at 7:00 earlier then tried to reset the timer for the above and it didn't come on. Any ideas?

What controller are you using? Why are you setting up both timer slots to the same timer? If there is only one timer the set it to a and leave the b timer at none.

 

[zzzdiver]

RKL I'll change timer b to "0"

 

[n2585722]

OK, I was not sure which controller you had. Why are you programming a PC4 for this.

 

[zzzdiver]

OK, I was not sure which controller you had. Why are you programming a PC4 for this.

The channel was off so I set it to on

 

[n2585722]

What does that have to do with the DP1?

 

[elmexotics]

If you changed the timer, there are one of 2 things you need to do. 1 - let the old timer runs its 24 hour course, or 2 - power cycle your controller so that it will send the new timers out.

 

[zzzdiver]

Thanks that did it

 

[zzzdiver]

What does that have to do with the DP1?

I may be missing your ? But the pc4 is my power supply that the dp1 is plugged into.

 

[n2585722]

I may be missing your ? But the pc4 is my power supply that the dp1 is plugged into.

That is OK I guess but you can plug the adapter in the normal outlet. You may want that output for something else eventually. I was just curious what the connection was.

 

[zzzdiver]

Funny I didn't even think about using the wall outlet, your right I will need to upgrade to the new DA system soon

 

[zzzdiver]

Hey while I have you guys looking-can I program the dpi to dose four time per hr over a 24 hr period? If so how would the ON and off time be programmed?
00:02:00 on
00:13:00 off
Repeat 95 ?

 

[elmexotics]

program it as:

00:02:00 on
00:13:00 off
Oscillate: on
This will put it into repeat forever mode for you.

 

[zzzdiver]

Thank you!