DIY all in one on 20x20x16 cube

[Dizaniel]

I am on the newer side of reefing. I have a 72g bowfront that I have been running for about 6 months now. I have a 20x20x16 cube (previously freshwater) that i have broken down and was interested in potentially converting it to an all-in-one. Any ideas or help would be appreciated or anyone know of conversion kits that would fit?

 

[susan ingram]

I am almost sure they are available.. check out bulk reef supply and let’s bump this to see what others say

 

[Pistondog]

I am on the newer side of reefing. I have a 72g bowfront that I have been running for about 6 months now. I have a 20x20x16 cube (previously freshwater) that i have broken down and was interested in potentially converting it to an all-in-one. Any ideas or help would be appreciated or anyone know of conversion kits that would fit?

Do you run a sump on the bow front?
Slave the 20x20 to that if proximal.

 

[Dizaniel]

Do you run a sump on the bow front?
Slave the 20x20 to that if proximal.

I do run a sump on the bow, was gonna put the cube in a different room though

 

[Pistondog]

I do run a sump on the bow, was gonna put the cube in a different room though

Awkward if more than 20 feet or so.
However,
I'm thinking about a couple of tanks around the house to 1 sump in the basement.
We have water supply lines running all over our houses, minimal issues.
So why not a drain and return line for a couple of tanks?
(Assumes you own or are related to owner!)

I currently have 3 tanks, 75 + 11 to 25 fuge, 11 standalone.

 

[Dizaniel]

Awkward if more than 20 feet or so.
However,
I'm thinking about a couple of tanks around the house to 1 sump in the basement.
We have water supply lines running all over our houses, minimal issues.
So why not a drain and return line for a couple of tanks?
(Assumes you own or are related to owner!)

I currently have 3 tanks, 75 + 11 to 25 fuge, 11 standalone.

We also dont have basements in Florida

 

[Pistondog]

We also dont have basements in Florida

Right!
For drains you need 1/4" drop per foot, maybe that can work.

 

[Dizaniel]

I am almost sure they are available.. check out bulk reef supply and let’s bump this to see what others say

Fijicube sells a 40g breeder AIO conversion that i may be able to make work, but def not made for the cube

 

[Jim8o]

Check out my build thread for my DIY AIO. Might help... possibly... who knows