DIY Ozone contact container

Aquanaut_Explorer

Community Member
View Badges
Joined
Jan 15, 2022
Messages
37
Reaction score
30
Location
Indiana, USA
What state or country do you live in
Indiana
Rating - 0%
0   0   0
I'm making an ozone contact reactor where I'll bubble in the ozone. When the ozonated water leaves the contact reactor it will go into a media reactor filled with activated carbon to help destroy residual O3. Anyone have a working setup they'd be willing to show/describe?
 
I'm making an ozone contact reactor where I'll bubble in the ozone. When the ozonated water leaves the contact reactor it will go into a media reactor filled with activated carbon to help destroy residual O3. Anyone have a working setup they'd be willing to show/describe?

IMO - the best contact tower is just a protein skimmer driving an ORP probe at the output for control. This gives a good reaction time, and then you can redirect the off-gas through the skimmer top, either outdoors, or through a carbon filter (I've used air mask carbon canisters for that). That keeps any free ozone out of your home's air (unless you are grossly over-dosing it).
 
I'm making an ozone contact reactor where I'll bubble in the ozone. When the ozonated water leaves the contact reactor it will go into a media reactor filled with activated carbon to help destroy residual O3. Anyone have a working setup they'd be willing to show/describe?
Thanks. I considered that route. Given that skimmers are short and fairly expensive I'm opting to create a 5 foot PVC tower and pump in O3 using a micro bubble disk. For O3, height of the contact vessel makes a difference for reaction and directly, ORP. I will have an activated carbon reactor at the tail end of the water flow to strip extra O3 (will check ORP here, after carbon). Bubbles will come out I know but those can disperse in the sump. For about $75 I can build the O3 contact vessel. I can then spend about $40 on a carbon reactor and put a few more $ in better pumps (water and air to drive the O3 generator). The ozone generator will only come on for about 30-45 min each night unless ORP is high... Then not on at all that night.
 

TOP 10 Trending Threads

WHEN NUISANCE ALGAE OR CYANO FIRST APPEARS, WHAT DO YOU DO FIRST?

  • Manually remove it and observe

    Votes: 9 22.0%
  • Retest nutrients and other parameters

    Votes: 9 22.0%
  • Adjust flow or lighting

    Votes: 1 2.4%
  • Reduce or change feeding

    Votes: 0 0.0%
  • Add or strengthen the cleanup crew

    Votes: 6 14.6%
  • Improve filtration or nutrient export

    Votes: 2 4.9%
  • Use a targeted treatment

    Votes: 0 0.0%
  • Wait and let the tank find its balance

    Votes: 11 26.8%
  • Phone a friend...

    Votes: 0 0.0%
  • It depends (explain in the comments)

    Votes: 3 7.3%
Back
Top
Home
Post thread…
Market
What's new