DIY stand issue

[cdfjr1975]

I have a 3/8 inch gap when I set the tank on the stand. To determine why I measured the corners and where 3 are 34 5/8 one is 35. I can pull up the top and either plane the supports or I could put shins under the top instead. Any advice on what possible actions I can take to correct.

Thanks!

 

[P-Dub]

I'd shorten the one rogue leg by 3/8 and be done with it. You could shim under the top of the stand but my retentive nature abhors shimming...

 

[NB Reefer]

I wouldn't shim it. Plane problem legs/support and make it true and level.

 

[NowGlazeIT]

Definitely want to get it done right before you get the tank wet. Headaches follow shortcuts in this hobby like a shadow.
Shims will grow less and less appealing once you start to enjoy the hard work paying off

 

[cdfjr1975]

Thanks everyone! I appreciate the advice!

I'm certainly not opposed to some manual labor to get it right so looks like I'm breaking it down to build it back up.

 

[Gloryofthereef]

You might also think about adding 1/2" or 1" foamboard to the top of that stand, (between tank and stand top) it helps with leveling.