DIY Sump

[Redfoxtang]

Just wanted to share my DIY sump!! I have to do this because my stand doesn’t like any standard size tank. So instead of buying a bookshelf tank I decided to build one!

 

[lapin]

good job

 

[Redfoxtang]

I’ll keep it updated from start until finished. If you guys like.

 

[MrWheelock]

:eek: what are the dimensions on that bad boy?

 

[Redfoxtang]

L 36” X W 9 3/4” X H 12”
Hopefully it resides nicely under this!!

 

[TheHarold]

How thick is the glass? Nice

 

[Redfoxtang]

How thick is the glass? Nice

1/4” I figured once I put the baffles in it won’t bow and the baffles will pull it tight together.

 

[MrWheelock]

1/4” I figured once I put the baffles in it won’t bow and the baffles will pull it tight together.

I was gonna ask if you were gonna put a rim on it

 

[Redfoxtang]

I was gonna ask if you were gonna put a rim on it

No rim, just a lot of silicone. Not taping nothing off since it’s gonna be a sump!

 

[MrWheelock]

Should be good with the baffles, looking forward to seeing how you position it off

 

[Redfoxtang]

Ok so here is a mock up of how I’m going to position the baffles!

 

[Redfoxtang]

I liked it so went ahead and glued it. Now time to dry, test, then hopefully install

 

[Redfoxtang]

Don’t mind all the silicone ;Smug

 

[fishybizzness]

How did the sump work out for you? I'm planning on building one myself with the same 1/4" plate glass.

 

[Redfoxtang]

Sump worked out great actually!! I didnt finish posting got really busy!

 

[fishybizzness]

Did you double up on the bottom or just single pane?

 

[Peace River]

Sump worked out great actually!! I didnt finish posting got really busy!

Nice work! Do you have finished pictures!

 

[Redfoxtang]

Did you double up on the bottom or just single pane?

All single pain just quite a bit of silicone!!

Nice work! Do you have finished pictures!

I sure do I will post some pictures when I get home!!

 

[Redfoxtang]

So I did put a little cross brace piece in as for peace of mind, you can see that where the white pvc is and that was just to hold it in place while it dried. Other than that worked out great!!

 

[fishybizzness]

Looks like it fits perfectly and is doing a great job!