dosers and tubing

[Acronuts]

I recently purchased a Kamoer doser and realized that the tubing it comes with is not enough to run lines to each container and then to my sump.


Where can i get specialized tubing? My local hardware stores don't carry anything that measures 1/8 inside diameter or in metric format 3mm.
Can anyone direct me to an online site that sells this type of tubing?

 

[zesty]

I only looked on amazon, so there may be others...

So, this is the 3mm ID
[url]http://www.amazon.com/Fluorotherm-F015090-Metric-Tubing-Semi-Transparent/dp/B00KJDKXDC/ref=sr_1_4?ie=UTF8&qid=1424874678&sr=8-4&keywords=3mm+tubing

[/URL]However, if 1/8" ID works, this is MUCH cheaper.
ATP Vinyl-Flex PVC Food Grade Plastic Tubing, Clear, 1/8" ID x 1/4" OD, 100 feet Length: Industrial Plastic Tubing: Amazon.com: Industrial & Scientific

 

[Acronuts]

I only looked on amazon, so there may be others...

So, this is the 3mm ID
http://www.amazon.com/Fluorotherm-F...TF8&qid=1424874678&sr=8-4&keywords=3mm+tubing

However, if 1/8" ID works, this is MUCH cheaper.

 

[Acronuts]

I only looked on amazon, so there may be others...

So, this is the 3mm ID
Fluorotherm F015090 - 5 Metric PTFE Tubing, 3 mm ID x 4 mm OD, 5' Length, Semi-Transparent: Amazon.com: Industrial & Scientific

However, if 1/8" ID works, this is MUCH cheaper.

 

[redfishbluefish]

By my calibrated eye, that tubing looks to be bigger than 3mm ID. For the $3.00, I'd pick up the 25 feet of 1/4 inch tubing from HD....that has 0.170 ID.....HERE

 

[cdness]

Yeah only the tubing in the doser head matters... The rest can be simple tubing

 

[Acronuts]

By my calibrated eye, that tubing looks to be bigger than 3mm ID. For the $3.00, I'd pick up the 25 feet of 1/4 inch tubing from HD....that has 0.170 ID.....HERE

I tried the 1/4 and it slides nicely in but does not hug the connecting piece tight. I thought about zip tie but I can't seal it tight enough to not cause a leak in the line.

 

[Acronuts]

Yeah only the tubing in the doser head matters... The rest can be simple tubing

A

Agreed but unfortunately the unit comes with these male pieces where the 3mm/ 1/8 tubing is the perfect size. Some suggested that I buy a connector that will downsize it to match the 1/4. but since i can find the rt kind why try to add something else that can get clogged IMO.

 

[ifarmer]

lowes and most lfs including petco are selling alot of these soft flexible tubes