Dosing refresher

  • Thread starter Thread starter GarrettT
  • Start date Start date
  • Tagged users Tagged users None

GarrettT

Well-Known Member
View Badges
Joined
Apr 23, 2021
Messages
918
Reaction score
636
Location
Austin, TX
What state or country do you live in
Texas
Rating - 0%
0   0   0
Long time reefer who has been away for awhile. I’m in need of a refresher. In the past, I have always used IO regular and dosed Muratic Acid, Ca, and Mg.

I use to dose in this order - MA -> Mg -> Ca.

Can any of these be dosed together? If not, how long between each dose?
 
Long time reefer who has been away for awhile. I’m in need of a refresher. In the past, I have always used IO regular and dosed Muratic Acid, Ca, and Mg.

I use to dose in this order - MA -> Mg -> Ca.

Can any of these be dosed together? If not, how long between each dose?

Are you talking to the new IO? Or the tank?

IO has levels of Ca and Mg that are higher than in the past.
Alk is still high and lowering it is a fine plan.

The order you note is good, but the latter two order won't matter much. Once you drop alk with muriatic acid, the pH is so low that no additional precipitation will likely be observed.
 
Both new IO and tank.

How long should I wait to dose the Mg/Ca after MA has been added? 24 hours?

The new IO salt has been rather finicky with the numbers, at least from the last two 50lb bags that I received. One batch is showing 1200 in Mg and 380 Ca, while the Mg on the other batch is read 1440 in Mg . Probably not a bad idea to go ahead and mix a few batches together.
 
I've used IO for the better part of 20 years(200G boxes). Always mixes up to whats expected(with slight variations obviously).

New IO?

Calcium is pretty much on point at right around 400 to 450, ALk is always high(lower with acid) 12DKH, and mag is always in the 1300 to 1500 range. Nothing of major concern other then lowering ALK.
 
Both new IO and tank.

How long should I wait to dose the Mg/Ca after MA has been added? 24 hours?

The new IO salt has been rather finicky with the numbers, at least from the last two 50lb bags that I received. One batch is showing 1200 in Mg and 380 Ca, while the Mg on the other batch is read 1440 in Mg . Probably not a bad idea to go ahead and mix a few batches together.

I'd be VERY careful about adding muriatic acid to the tank due to the pH drop.
 
It would be in the mixing container 24 hrs before adding to the display. I like to keep my water changes similar to the DT's parameters.
 
It would be in the mixing container 24 hrs before adding to the display. I like to keep my water changes similar to the DT's parameters.

In the salt mix before adding to the tank, that's fine. :)
 
Why not use citric acid instead. Muriatic acid is very strong and it's very easy to overdose.
Honestly, I've never heard of the stuff. I wouldn't even know where to start. Care to provide more details surrounding the process?
 
Maybe switch to a pro salt with a more desireable alk? IO mixes around 9.5 for me, which I don't find high at all.

There are a few brands that mix closer to 7.
 
Would that matter if this was done outside of the DT? I mentioned Citric Acid because is a much safer acid to use than Muriatic.

No, it isn't suitable anywhere, if you want the alkalinity to stay down.

If the safety of the liquid acid is a concern, as it well might be, solid sodium bisulfate is the answer.
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 20.0%
  • I decorate AROUND the tank or stand

    Votes: 1 20.0%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 3 60.0%
  • We don’t decorate for the holidays

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new