Drifting alk reagent?

reeferpat137

Active Member
View Badges
Joined
Mar 5, 2022
Messages
245
Reaction score
140
Location
buffalo
What state or country do you live in
New York
Rating - 0%
0   0   0
Went on vacation for 12 days, got home and just tested my alk. Hanna read 8.7 before i left, 11.0 today. Redsea reads 9.2.... i checked the hanna with standard solution, its spot on. I also did a small, maybe 2 gal WC. Fluval 13.5 dosing All For Reef. Should i trust the hanna? Does reagent drift over time?
 
Yes (trust, but verify) and yes, reagents are known to drift. With the Hanna you can have all sorts of variances, from the black line being printed at different heights on the vials (use a syringe measurement instead), how clean the vial is, any fingerprints on it, etc. And the reagents can drift. I always like to have a backup titration test kit to keep the Hanna honest.
 
Yes (trust, but verify) and yes, reagents are known to drift. With the Hanna you can have all sorts of variances, from the black line being printed at different heights on the vials (use a syringe measurement instead), how clean the vial is, any fingerprints on it, etc. And the reagents can drift. I always like to have a backup titration test kit to keep the Hanna honest.
I try to be as precice as possible, only using one vile, for as long as i can until the line fades. Filling so that the bottom curve of the water is almost perfect with the line. I even rince the cuvette the same way every time. I try to be very accurate... i do have another bottle of reagent, but i didnt want to open it just to double check. I did notice my Ph was low, 8.0, and found the venturi fitting was partially pluged reducing air flow through my Co2 scrubber. Fixed the air flow and Ph went back to 8.4. Im guessing that reduced Ph will lead in increasing alk levels?
 
How long has the bottle of reagent been open?

A small PH (.3) fluctuation wouldn't cause your ALK to rise that high unless consumption changed. I would open the other bottle and verify.

Just had to do this myself. Got an odd reading from my already open bottle, tested again, got the same number. I have several in my cupboard, so I opened a new bottle, and got roughly the same reading. Also used a salifert titration test, and again got the same number. I knew my ALK had jumped, but no idea why, and verified my reading with 2 other test. I would never trust a single data point, and most certainly would never react(shut my doser off for a day or 2 till I'm back in line where I like to keep things), without a second, or even third confirmation.

Remember stability is more important then any particular number.
 
Im guessing that reduced Ph will lead in increasing alk levels?

With fixed alk dosing, that will likely be true since both biological and abiotic demand for alk can be reduced as pH declines.
 
3 days later, other than fixing the venturi on my skimmer, nothing has been done. Alk down to 9.5, Ph 8.2-8.5. Gotta love the simple fixes
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 18 18.6%
  • Fish or coral food

    Votes: 5 5.2%
  • Test kits or reagents

    Votes: 10 10.3%
  • Filter media or replacement fleece

    Votes: 5 5.2%
  • RO/DI filters or supplies

    Votes: 15 15.5%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 12 12.4%
  • I keep a backup of everything

    Votes: 25 25.8%
  • Other (Post in the comments)

    Votes: 7 7.2%
Back
Top
Home
Post thread…
Market
What's new