Drilled and siliconed!

shovelrider

Active Member
View Badges
Joined
Jul 17, 2012
Messages
359
Reaction score
6
Location
Harvest,AL
Rating - 0%
0   0   0
Another couple steps closer to getting the 75g salty!
I drilled both holes in less than 15 min. with a hole saw that had been used for 4 holes previously.
The glass for the box was cut at Huntsville Glass, great people over there.


2013-08-02 22.37.49.jpg
siliconed the overflow box together with black silicone.

2013-08-02 22.38.27.jpg
This time I used tinted glass. A little more expensive but I think it will look better than my first box that was clear glass with clear silicone.

2013-08-04 23.52.52.jpg
I used black silicone to attach it to the tank so it will blend into the background after I paint it black.

2013-08-04 23.53.14.jpg
Now to let it cure for 2 days.

More to come when I get to the plumbing later this week.
 
Last edited:
Having only had all-in-one tanks, I'm wondering what is the reason for bending the pipes back toward the tank instead of running them straight down. Is it for noise?
 
I do this for support primarily, so I can attach the pipes to the stand. It helps with noise if your running gravity drains, but I'll be running a full siphon.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new