Dry fit or permanent pvc to sump bulkheads?

P-Dub

The ocean is open to all, merciful to none.
View Badges
Joined
Sep 30, 2017
Messages
5,455
Reaction score
23,499
Location
West Pacific
Rating - 0%
0   0   0
Threaded to glued to dry. I use it all
 

JoshH

Tank Status: Wet...ish, growing things....
View Badges
Joined
Dec 3, 2016
Messages
9,994
Reaction score
35,394
Location
Humble
Rating - 0%
0   0   0
You shouldn't if it's a snug fit, I plumb the same as @P-Dub myself, usually threaded bulkhead, with a threaded/slip adapter into a slip/slip union
 

mfinn

likes zoanthids
View Badges
Joined
Jul 22, 2006
Messages
11,901
Reaction score
8,417
Location
Olympia, WA.
Rating - 100%
5   0   0
My drain on my 66 gallon tank is directly over the sump, so those are not glued. ( not threaded)
On my 233 gallon tank I have a bean animal style external overflow box. The drains have several turns, so they are glued down until the pipes are directly over the sump.
 

Pntbll687

Valuable Member
View Badges
Joined
Oct 4, 2017
Messages
2,094
Reaction score
2,609
Rating - 0%
0   0   0
I had mine just dry fit into the sump bulkhead, but got some salt creep around the joint. I just took the pipe out, added some silicone and put back in. Solved the salt creep, and can be removed later on if needed.
 
OP
OP
Tuffloud1

Tuffloud1

Valuable Member
View Badges
Joined
Nov 24, 2014
Messages
1,274
Reaction score
1,079
Location
The People's Republic of California
Rating - 0%
0   0   0
Just wondering if I should dry fit the 3 - 1.5” drains into the sump bulkheads or cement.

4F2DDD26-6A85-4938-B345-B9808748D2EF.jpeg
 

X-37B

Fight The Good Fight
View Badges
Joined
Sep 10, 2018
Messages
9,175
Reaction score
15,938
Location
The Outer Limits
Rating - 0%
0   0   0
I had mine just dry fit into the sump bulkhead, but got some salt creep around the joint. I just took the pipe out, added some silicone and put back in. Solved the salt creep, and can be removed later on if needed.
I use a very small amount of silicone on the bulkhead washer. Make sure it is very thin, even and covers all of the rubber washer. I then put the silicone side against the glass and press the bulhead on it to get a good seal. Leave the bulkhead, but do not tighten the nut yet, and let dry for at least 24 hrs. You can remove the bulkhead and the washer is sealed against the glass.
Never had salt creep or a leak doing it this way
 

Reefing threads: Do you wear gear from reef brands?

  • I wear reef gear everywhere.

    Votes: 42 15.7%
  • I wear reef gear primarily at fish events and my LFS.

    Votes: 17 6.4%
  • I wear reef gear primarily for water changes and tank maintenance.

    Votes: 1 0.4%
  • I wear reef gear primarily to relax where I live.

    Votes: 33 12.4%
  • I don’t wear gear from reef brands.

    Votes: 155 58.1%
  • Other.

    Votes: 19 7.1%
Back
Top