Eshopps Eclipse L on 3/4 inch glass

  • Thread starter Thread starter enveetie
  • Start date Start date
  • Tagged users Tagged users None

enveetie

Well-Known Member
View Badges
Joined
Feb 23, 2017
Messages
903
Reaction score
810
Rating - 0%
0   0   0
Just wanted to share my experiences with the Eshopps Eclipse L I just installed on my 3/4 inch thick square tank.

The Eclipse L will NOT fit on a 3/4 inch thick tank using all of the supplied gaskets. The overflow system comes with three gaskets on each 1.5 inch drain from weir to drainage box. One is pre-installed on the flange in the weir itself, and two are supplied for installation between the overflow box and aquarium glass and between the locking nut and overflow drain box. Using all three gaskets on a 3/4 inch tank, the locking nut will not secure itself to the threads.

I ended up using silicone as the gasket between the locking nut and overflow box. So my gasket install order from the tank interior to exterior is: pre-installed gasket in weir | weir box | gasket | glass | overflow box | silicone | locking nut. I figure as long as the gasket between the tank and weir holds up, the gasket between the overflow box and tank is unnecessary since I'm going to silicone the locking nut to the overflow.

Or maybe move the weir/glass gasket to overflow/glass and it could serve double duty.
 
Last edited:

TOP 10 Trending Threads

WHAT MOST OFTEN MAKES YOU REACH FOR YOUR CAMERA AROUND THE REEF?

  • Coral behavior (feeding, extension, or movement)

    Votes: 0 0.0%
  • New growth or a color change

    Votes: 1 20.0%
  • Unusual fish behavior

    Votes: 0 0.0%
  • The whole tank looking especially good

    Votes: 2 40.0%
  • Something I want to document in case it changes

    Votes: 0 0.0%
  • A funny or unexpected interaction

    Votes: 0 0.0%
  • I usually put the camera/phone down and just watch

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 2 40.0%

New Posts

Back
Top
Home
Post thread…
Market
What's new