Eshopps Mariner M130 Gallon Reef Build

TankAndTurbines

Community Member
View Badges
Joined
Feb 25, 2026
Messages
83
Reaction score
67
Location
Long Island
What state or country do you live in
New York
Rating - 0%
0   0   0
I'v been out of the hobby for about 6 years but, I'm back. This time I am going bigger than any tank I've had before. I use to have nano aquarium's that I posted about on my YT channel. I was big into DIY back then and how I could make a nano tank the best it could be or ways to save money, etc.

Now I am building my dream tank. Below is what I have ordered and will post pictures as things get delivered and come together!

- Eshopps Mariner M130 w/ White Stand
- 2x XR30 Radion G6 Blue Lights
- 2x Ecotech MP40mQD
- Vectra M2 Return Pump
- Reef Octo Regal 150sss
- RedSea ReefMat 1200
- RedSea ATO+
- Aquatop 300W Titanium Heater Combo

Custom rock aquascape will be from Chandler Rocks

Plan on using special grade arag-alive for sand, maybe 60ish pounds; don't want too deep of a sand bed
 
Following along! Chandler Rocks does some incredible aquascapes! Not to mention David and his wife are super nice,
 
I'v been out of the hobby for about 6 years but, I'm back. This time I am going bigger than any tank I've had before. I use to have nano aquarium's that I posted about on my YT channel. I was big into DIY back then and how I could make a nano tank the best it could be or ways to save money, etc.

Now I am building my dream tank. Below is what I have ordered and will post pictures as things get delivered and come together!

- Eshopps Mariner M130 w/ White Stand
- 2x XR30 Radion G6 Blue Lights
- 2x Ecotech MP40mQD
- Vectra M2 Return Pump
- Reef Octo Regal 150sss
- RedSea ReefMat 1200
- RedSea ATO+
- Aquatop 300W Titanium Heater Combo

Custom rock aquascape will be from Chandler Rocks

Plan on using special grade arag-alive for sand, maybe 60ish pounds; don't want too deep of a sand bed
Following, keep the pictures coming, very excited.
 
Working on my controller board while I'm waiting for my tank to come in. I was thinking about using a hinge to let it swing onen like a door with another controller board behind it for a doser and any other future equipment. Let me know your thoughts. :)
b2738184-9f79-4af7-9547-91d0f1f2c37c.jpg


228689f5-7c2c-4952-8230-87d36f8bf627.jpg
 
Last edited:
This is so cool, keep pictures coming.
 
Had a little time on my hand's so I re-created the stand with a couple controller boards. This should be a little closer to scale. It looks like I will have some extra room at the bottom but I think I will stick to 2 boards so there's room to add new equipment.
Screenshot 2026-03-05 at 4.48.36 PM.png
 
Had a little time on my hand's so I re-created the stand with a couple controller boards. This should be a little closer to scale. It looks like I will have some extra room at the bottom but I think I will stick to 2 boards so there's room to add new equipment.
Screenshot 2026-03-05 at 4.48.36 PM.png
Slick looking board! Can't wait to see the finished product!
 
Had a little time on my hand's so I re-created the stand with a couple controller boards. This should be a little closer to scale. It looks like I will have some extra room at the bottom but I think I will stick to 2 boards so there's room to add new equipment.
Screenshot 2026-03-05 at 4.48.36 PM.png
I love it
 
So when I was looking at the design this morning I noticed things seemed a little off and I was right. The measurements for the stand and control board's were a bit off (probably bc my little guy was distracting me haha 😂 😅). Today I resized everything and it is actually closer to my hand sketch I made. I was thinking about putting both boards on piano hinges and mounting them to the right side of the stand that way they'd be easy to move and work on.
 

Attachments

  • Screenshot 2026-03-06 at 9.32.57 PM.png
    Screenshot 2026-03-06 at 9.32.57 PM.png
    203.9 KB · Views: 144
  • Screenshot 2026-03-06 at 9.27.33 PM.png
    Screenshot 2026-03-06 at 9.27.33 PM.png
    89.7 KB · Views: 127
  • Screenshot 2026-03-06 at 9.26.08 PM.png
    Screenshot 2026-03-06 at 9.26.08 PM.png
    134.5 KB · Views: 135
  • Screenshot 2026-03-06 at 9.25.28 PM.png
    Screenshot 2026-03-06 at 9.25.28 PM.png
    107.9 KB · Views: 138
  • Screenshot 2026-03-06 at 9.24.57 PM.png
    Screenshot 2026-03-06 at 9.24.57 PM.png
    216.6 KB · Views: 98
Another day, another design change. I decided to move the Apex energy bar to the top. I will run short extension chords up and over the control board instead of having to drill another hole. Today I also started working on where I will most likely mount my ballasts' to the back of the board along with some chord covers.

Screenshot 2026-03-07 at 9.35.05 PM.png
Screenshot 2026-03-07 at 9.40.14 PM.png
 
Do you have a CNC to cut this out?
No I will have to do it manually haha. I'll measure and cut with a hole saw. It's easy to measure everything on the computer and transpose it to plywood or acrylic
 
Another new design 😅 I've been looking into the Hydros system and leaning towards that over the Apex. Rearranged the controller board to include an X10 and XP8 unit. The power bar on the back wall looks bare but there's room to add to it; plus the ballast for the light's will be on the back of it. Planning on making the panel with the Hydros equipment a slide out panel in case I need to work on it and back panel will be on a hinge to make accessing it easier.

Screenshot 2026-03-09 at 10.09.50 PM.png


Screenshot 2026-03-09 at 10.07.47 PM.png


Screenshot 2026-03-09 at 10.11.13 PM.png
 
Last edited:
Today was an exciting day! It's finally here and I can start working on getting things together 😁 it might be a month or so before I get water in the tank but I have plenty to do in the meantime
58cd3aef-89d1-44c7-b545-699685e0c90b.jpg
88c0fb38-670e-4362-94c9-6179a20203a7.jpg
 
Glad to see people are getting the updated sumps! I ordered mine in January and got the old sump, but Eshopps is supposed to be sending me the new sump in late April, since that is what they had advertised
 
Okay, now that the tank is here I took all the measurement's I needed and this should be the final design of the control boards. I've added a couple cut out's on the side of each one so it will make it easier to pass wire's in between. I also added a drawer slides to pull out the right control board. Now lets hope I can cut everything as well as I designed it haha! So far on the tank I got most of the plumbing in (not seen in the video bc I just finished installing the lights); just waiting on the reefmat to come in so I can plumb that. And I installed 32' of LED light strip to light up the inside of the stand for better lighting when I need to work on anything.

Screenshot 2026-03-13 at 4.42.05 PM.png


Screenshot 2026-03-13 at 4.34.58 PM.png


Screenshot 2026-03-13 at 4.39.49 PM.png


Screenshot 2026-03-13 at 4.37.40 PM.png
 
Last edited:

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 18 29.5%
  • I’d trust someone who knows my tank to choose

    Votes: 2 3.3%
  • I’d rather get a gift card and pick it myself

    Votes: 23 37.7%
  • I’d prefer gear or supplies instead

    Votes: 1 1.6%
  • Please don’t surprise me with livestock

    Votes: 17 27.9%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new