- Joined
- Aug 15, 2017
- Messages
- 4,523
- Reaction score
- 7,476
Hi there
Apex classic, hardwired to router.
My return pump is on outlet 3 (triac) with a setn Fallbackn statement
Whenever my head unit loses contact with the eb8, outlet 3 stays on. Good. A subsequent reconnect between HU and eb8 leads to a short off-on blip, presumably as the triac is ‘reset’ as the connection is formed. Not good
This happened during a power cut this week, where power was restored and everything started up smoothly, but as soon as I regained connection to the HU, I got the blip
Happened twice during an attempt to fix the internet connection issue from other posts, and when I rebooted the head unit by removing and replacing the aquabus to the eb8, got the blip . Second time, one of my clowns got sucked into the return and ejected upon restart. In hospital tank now with e popped eyeball and lacerations. My guess he was in the pump.
Is this ‘blip’ expected on the triac outlets? If so, it would have been good to know about that.
Any ideas if this is normal?
@NeptunePaul
@Terence
@RussM
Tagging because my last few threads here apparently went unnoticed and I’d appreciate someone commenting
Thanks
Apex classic, hardwired to router.
My return pump is on outlet 3 (triac) with a setn Fallbackn statement
Whenever my head unit loses contact with the eb8, outlet 3 stays on. Good. A subsequent reconnect between HU and eb8 leads to a short off-on blip, presumably as the triac is ‘reset’ as the connection is formed. Not good
This happened during a power cut this week, where power was restored and everything started up smoothly, but as soon as I regained connection to the HU, I got the blip
Happened twice during an attempt to fix the internet connection issue from other posts, and when I rebooted the head unit by removing and replacing the aquabus to the eb8, got the blip . Second time, one of my clowns got sucked into the return and ejected upon restart. In hospital tank now with e popped eyeball and lacerations. My guess he was in the pump.
Is this ‘blip’ expected on the triac outlets? If so, it would have been good to know about that.
Any ideas if this is normal?
@NeptunePaul
@Terence
@RussM
Tagging because my last few threads here apparently went unnoticed and I’d appreciate someone commenting
Thanks