FishFace NJ build

[tbrown]

I'm so confused.

 

[fishface NJ]

 

[That Crusso Kid]

Hooray! Power is back

So happy the power was restored. I hadn't commented on it but I was sending good "energy" your way, Pete.

@tharbin Tom doesn't know how not to start and, even if he did, I doubt he would be able to stop himself.

 

[Evil1]

Hey D how’s it going? Any updates?

 

[oldschoolreefer26]

Here she is!

Love all the tonga! How are things progressing?

 

[fishface NJ]

Hey D how’s it going? Any updates?

I don't get notifications on my thread. Sorry for not replying right away.

My numbers are still the same. I wish I could get the NO3 a little lower. Numbers are exactly as they were on June 13th. Still running the reactor with carbon and 4 spoons of GFO. I replace it every 4 weeks.

Kh 8.1
Mg 1410
Ca 460
PO4 0.25
NO3 25

My ATI T5 8 blub light is hanging from the conduit. I also have 1 Reefbreeder strip bar attached to the front of the ATI T5 fixture and 1 Orphek bar on the back side. I have not pugged in the bars yet.

I had lost power the morning of July 4th. Power came on the evening of the 8th. The temps outside was 98-101. Inside was horrible. My fish room doesn't have any windows. I scooped out the fish and put two tanks outside with a battery running fan, Fluval canister and powerhead. Fishes all survived. The 3 acros did not

 

[CoralB]

I don't get notifications on my thread. Sorry for not replying right away.

My numbers are still the same. I wish I could get the NO3 a little lower. Numbers are exactly as they were on June 13th. Still running the reactor with carbon and 4 spoons of GFO. I replace it every 4 weeks.

Kh 8.1
Mg 1410
Ca 460
PO4 0.25
NO3 25

My ATI T5 8 blub light is hanging from the conduit. I also have 1 Reefbreeder strip bar attached to the front of the ATI T5 fixture and 1 Orphek bar on the back side. I have not pugged in the bars yet.

I had lost power the morning of July 4th. Power came on the evening of the 8th. The temps outside was 98-101. Inside was horrible. My fish room doesn't have any windows. I scooped out the fish and put two tanks outside with a battery running fan, Fluval canister and powerhead. Fishes all survived. The 3 acros did not

Diana try no pox for No3

 

[CoralB]

Just be careful with your phosphate level . I use phosphate E for phosphate and the no pox for nitrate

 

[Evil1]

I don't get notifications on my thread. Sorry for not replying right away.

My numbers are still the same. I wish I could get the NO3 a little lower. Numbers are exactly as they were on June 13th. Still running the reactor with carbon and 4 spoons of GFO. I replace it every 4 weeks.

Kh 8.1
Mg 1410
Ca 460
PO4 0.25
NO3 25

My ATI T5 8 blub light is hanging from the conduit. I also have 1 Reefbreeder strip bar attached to the front of the ATI T5 fixture and 1 Orphek bar on the back side. I have not pugged in the bars yet.

I had lost power the morning of July 4th. Power came on the evening of the 8th. The temps outside was 98-101. Inside was horrible. My fish room doesn't have any windows. I scooped out the fish and put two tanks outside with a battery running fan, Fluval canister and powerhead. Fishes all survived. The 3 acros did not

25 N03 is excellent in my opinion! I wouldn’t do a thing. Anything between 10 and 50 ppm is good in my book. Don’t go chasing numbers D

 

[fishface NJ]

25 N03 is excellent in my opinion! I wouldn’t do a thing. Anything between 10 and 50 ppm is good in my book. Don’t go chasing numbers D

Yes sir. Will do. It's so strange to me how different this tank is from the two others I had in the past. Both were ultra low PO4 and NO3 without me doing anything.

I am enjoying the new ATI T5 fixture. The others I had were on or off. This one has a timer and it ramps up and down. The light during the ramp up and down comes across as blue. This is the main reason I haven't plugged in the LED strip lights yet.

Thank you and enjoy your day!

 

[Evil1]

Yes sir. Will do. It's so strange to me how different this tank is from the two others I had in the past. Both were ultra low PO4 and NO3 without me doing anything.

I am enjoying the new ATI T5 fixture. The others I had were on or off. This one has a timer and it ramps up and down. The light during the ramp up and down comes across as blue. This is the main reason I haven't plugged in the LED strip lights yet.

Thank you and enjoy your day!

Send us some pictures when you can

 

[kevgib67]

I don't get notifications on my thread. Sorry for not replying right away.

My numbers are still the same. I wish I could get the NO3 a little lower. Numbers are exactly as they were on June 13th. Still running the reactor with carbon and 4 spoons of GFO. I replace it every 4 weeks.

Kh 8.1
Mg 1410
Ca 460
PO4 0.25
NO3 25

My ATI T5 8 blub light is hanging from the conduit. I also have 1 Reefbreeder strip bar attached to the front of the ATI T5 fixture and 1 Orphek bar on the back side. I have not pugged in the bars yet.

I had lost power the morning of July 4th. Power came on the evening of the 8th. The temps outside was 98-101. Inside was horrible. My fish room doesn't have any windows. I scooped out the fish and put two tanks outside with a battery running fan, Fluval canister and powerhead. Fishes all survived. The 3 acros did not

I ran my previous tank for 4 years with phosphate at .25 and nitrates at 25 and every thing thrived. I think it’s a good ratio.

 

[CoralB]

25 N03 is excellent in my opinion! I wouldn’t do a thing. Anything between 10 and 50 ppm is good in my book. Don’t go chasing numbers D

I do agree with this .

 

[fishface NJ]

Send us some pictures when you can

Nothing new except 3 dead acros due to no electricity in high temperatures

Tomorrow I have some coral showing up in the mail

And replacing the wave makers with a larger Jecod model.

 

[kevgib67]

Nothing new except 3 dead acros due to no electricity in high temperatures

Tomorrow I have some coral showing up in the mail

And replacing the wave makers with a larger Jecod model.

Beautiful scape Diana, so sorry about your losses. Can’t wait to see the new corals tomorrow!

 

[Evil1]

Nothing new except 3 dead acros due to no electricity in high temperatures

Tomorrow I have some coral showing up in the mail

And replacing the wave makers with a larger Jecod model.

Looking good!

 

[fishface NJ]

Thank you @Evil1 and @kevgib67. Doing a water change now. I haven't done one in 4 weeks. My lazy buttocks

 

[CoralB]

Thank you @Evil1 and @kevgib67. Doing a water change now. I haven't done one in 4 weeks. My lazy buttocks

New Fish ?
Pics please !

 

[CoralB]

Hi Diana !

 

[fishface NJ]

@CoralB No new fish yet. I thought my order was arriving today but it's shipping today. It's an order from POTO for corals. My next fish order will be from Dr Reef but I need to save $$$. I would like to get 4 Anthia. I fell in love with @Evil1 Copperband...that is also on my list.