Flow issue nuvo 40

RedReefer777

Community Member
View Badges
Joined
Sep 27, 2018
Messages
36
Reaction score
21
Location
Toms River, N.J.
What state or country do you live in
New Jersey
Rating - 0%
0   0   0
New here, just set up my first saltwater tank. I have a nuvo 40 fusion with a sicce 2.0 return pump....theres a dial on the pump to adjust flow, what do you guys run yours at? Full open, half way? I feel that full open is too much flow but I could be wrong.

I also have a nero 5 powerhead that I have at random flows ranging from 5-20%....
My sand bed doesnt get moved but you can see the particles in the water moving really fast....

Thank you in advance
 
I would say the more the better as long as you aren’t creating any other problem.
 
I would start at mid opening and adjust either up or down but would not blast current in a minimal space. Sicce is a great pump and will fo the job
 
I had 2 mp10’s and the Sicce 2 pump. My pump was set to full. The MP10’s were attached to my Apex controller, so they had random cycles throughout the day. My 40 was a mixed reef..

222db2bb0351011615116d615ecb4a8b.jpg


Both mp10s were closer to the top [emoji4]
 
Just FWIW I have a mixed reef 34g deep blue. It has a sicce 2.0 return, MP10, tunze 6040, and two reefbreeders RP-M (like mp40) - they all running pulse mode above 50% power. I would run even more flow if it wasn't a mixed reef with LPS in there.
 
I like a lot of flow and try to be careful in placing corals in areas with appropriate flow rates. IME, you can have both: good water/gas exchange and optimal conditions for different species of corals by carefully mapping out their placement. Good luck.
 
New here, just set up my first saltwater tank. I have a nuvo 40 fusion with a sicce 2.0 return pump....theres a dial on the pump to adjust flow, what do you guys run yours at? Full open, half way? I feel that full open is too much flow but I could be wrong.

I also have a nero 5 powerhead that I have at random flows ranging from 5-20%....
My sand bed doesnt get moved but you can see the particles in the water moving really fast....

Thank you in advance
what type of coral do you have. they are different and like different flow
 
Depends on the corals you have but I beleive its more important that the main flow comes from powerheads as opposed to the main filter pump. I'd start it half way and maybe go 3/4 at most.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new