Fluval Aquaclear 70 for 20 Gallon Tall

[adaniel1990]

I just bought a fluval aquaclear 70 for a 20 gallon tall. I know more filtration is better, it just seems to be a very strong flow when on the slowest setting. I'm also running a skimmer and ecotech MP10.

Should i go down a size for the filter

 

[MnFish1]

IMHO - the more flow the better - especially if its a tall tank. Are you thinking there is too much because fish or coral are not doing well? Can you adjust your skimmer/MP10 such that the flow is more turbulent, etc?

 

[shakacuz]

i agree with the post above. perhaps lowering the mp10?

 

[adaniel1990]

IMHO - the more flow the better - especially if its a tall tank. Are you thinking there is too much because fish or coral are not doing well? Can you adjust your skimmer/MP10 such that the flow is more turbulent, etc?

I have adjusted those down as well and still seems a bit much

 

[shakacuz]

I have adjusted those down as well and still seems a bit much

maybe placing a sponge there to break the flow a bit?

 

[ge2655]

You can replace the current Aquaclear 70 impeller with an Aquaclear 50 impeller. The impellers are interchangeable and available on Amazon. The Aquaclear 50 impeller will reduce the flow rate while retaining the larger media space of the Aquaclear 70 case.

-Gary

 

[MongooseSnake]

You can replace the current Aquaclear 70 impeller with an Aquaclear 50 impeller. The impellers are interchangeable and available on Amazon. The Aquaclear 50 impeller will reduce the flow rate while retaining the larger media space of the Aquaclear 70 case.

-Gary

What about replacement O ring for an old aquaclear 70, where to buy

 

[exnisstech]

I doubt the 70 is too much flow. I run 110 on a 29g tall.