Foam under 300 gallon acrylic tank

Jordan Cantrell

New Member
View Badges
Joined
Feb 19, 2018
Messages
13
Reaction score
4
What state or country do you live in
California
Rating - 0%
0   0   0
I’ve been doing a lot of research and see mixed opinions on whether to place foam under large acrylic tanks. Can anyone give me their experience? I’m leaning towards the pink sheet foam at big box hardware stores 1/2 inch.
 
agree 100%
 
you can use very thin foam under acrylic, technically there is no reason to use it as it allows the bottom to deflect.
 
1/2 Could be enough to bust a seam Maybe some real thin like what goes under laminate flooring. I had the front of a 90 acrylic breakout didn’t have enough support on the bottom
 
you can use very thin foam under acrylic, technically there is no reason to use it as it allows the bottom to deflect.
I’m confused now. I’ve had and have large glass tanks, but I’m waiting on a 10x3x2 acrylic tank to arrive and was planning to use a 1/2” to 1” foam board underneath the tank. My understanding as been that this was the best practice because of impurities and pressure points.
 
I would ask the manufacturer.

For me to recommend, pictures would help. Generally, I think most acrylic tanks wouldn't need foam if the stand is flat and fully supported.
 
1/2 Could be enough to bust a seam Maybe some real thin like what goes under laminate flooring. I had the front of a 90 acrylic breakout didn’t have enough support on the bottom
A little confused by this post -- I've never had an acrylic tank. Is it possible that adding the foam could be a bad thing?
 
I would ask the manufacturer.

For me to recommend, pictures would help. Generally, I think most acrylic tanks wouldn't need foam if the stand is flat and fully supported.
Yes 100% if the manufacturer is known call them and do what they say. They know their tank and have a vested interest in it not failing. Sure forum advise is fine, and something to keep in mind, but no one here unless a representative of that company has any risk giving any answer
 
I agree with @hart24601 — although the manufacturer can tell you about their tank; they will have to ask a bunch of questions about your stand— and that’s where the ‘out of level,’ ‘pressure point’ type of aspects could become key. But again, no doubt that calling the Mfg. could only be a positive move. ;)
 
Has anyone used the pink foam and how did the tank settle on it?
 
actually I’m leaning towards the neoprene mat the BRS sells. Do you guys think one or two layers. It’s 1/8 inch.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 5 14.3%
  • Lighting, pumps, or other major equipment

    Votes: 4 11.4%
  • Controllers, testing, dosing, or automation gear

    Votes: 4 11.4%
  • Dry goods and restocks, like salt, media, or food

    Votes: 4 11.4%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 22.9%
  • Fish or other livestock

    Votes: 1 2.9%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 2.9%
  • I’m browsing, but don’t have a specific target

    Votes: 4 11.4%
  • I’m not shopping for reef deals this year

    Votes: 4 11.4%
  • Other (Post in the comments)

    Votes: 1 2.9%
Back
Top
Home
Post thread…
Market
What's new