CausticGuy
Active Member
FS: DIY Cree 21 LED Fixture
Mounted on a 8.5x24" Heatsink from Heatsink USA
11 Cree XPG Cool Whites
10 Cree XRE Royal Blues
Driven by 2 MeanWell ELN-60-48D
LEDs are bonded and screwed down with 3 4-40 nylon screws
2 80mm fans mounted on top for cooling (recessed into the fins)
Cords for wires are shrink tubed and I put moisture proof connectors on it
All wired up and ready for your 0-10v input into the 2 drivers and ac adaptor for fans
I used the fixture for 2 months before having to take it down due to a upcoming move. I ran the whites at 45% and the blues at 100% and got good color. There is plenty of room to add more LEDs to the heatsink or run it the way it is. The fixture works great and doesnt have any problems but keep in mind it is a DIY project and I wont warranty the fixture for anything more then a DOA.
I also have one more new unused MeanWell ELN-60-48D with power cord.
Looking for only $225 plus shipping for the fixture and $30shipped for the extra driver. I take Paypal!
Mounted on a 8.5x24" Heatsink from Heatsink USA
11 Cree XPG Cool Whites
10 Cree XRE Royal Blues
Driven by 2 MeanWell ELN-60-48D
LEDs are bonded and screwed down with 3 4-40 nylon screws
2 80mm fans mounted on top for cooling (recessed into the fins)
Cords for wires are shrink tubed and I put moisture proof connectors on it
All wired up and ready for your 0-10v input into the 2 drivers and ac adaptor for fans
I used the fixture for 2 months before having to take it down due to a upcoming move. I ran the whites at 45% and the blues at 100% and got good color. There is plenty of room to add more LEDs to the heatsink or run it the way it is. The fixture works great and doesnt have any problems but keep in mind it is a DIY project and I wont warranty the fixture for anything more then a DOA.
I also have one more new unused MeanWell ELN-60-48D with power cord.
Looking for only $225 plus shipping for the fixture and $30shipped for the extra driver. I take Paypal!
Last edited:
