GHL Tower Setup with ION Director and KH Director

[PmRg]

Hello everyone,

here it is my full GHL setup, with the latest ION Director :D :D I will be posting measuring granphs after I have a few more tests done :)

Equipment:
GHL ProfiLux 4 Mega Set
1 GHL Power Bar 5.1
1 PLM-pH/Redox
1 Temp sensor
2 pH sensor
1 ORP sensor
1 Conductivity Electrode
1 GHL Touch Display
1 GHL Solenoid
1 GHL KH Director
1 GHL ION Director
4 GHL Doser 2.1
1 GHL Doser Maxi
1 GHL Optical Level Sensor
1 GHL Float Switch Level Sensor
1 GHL Leakage Sensor
1 GHL Sensor holder 1
1 GHL Level Sensor Holder Base Unit
1 GHL Level Sensor Fastener, angled
1 GHL Level Sensor Fastener
1 PropellerControl-2.1
1 GHL Gen 2 Propeller Breeze 6X

A few shots of the sump area:

.

 

[tdhnry]

;Drool

Wow. What a setup.

What is the bracket that is holding up the doser on the top?

 

[PmRg]

;Drool

Wow. What a setup.

What is the bracket that is holding up the doser on the top?

thank you :D

it's custom made 3D printed bracket to hold the doser near the dosing containers.

Pedro

 

[windemerejack]

Any chance of a pic of what all that equipment is for? ie your tank. :)

 

[vangvace]

That... is a very unique spot for a wifi access point. :D I dig it.

 

[PmRg]

Any chance of a pic of what all that equipment is for? ie your tank. :)

Sure here it is:

That... is a very unique spot for a wifi access point. :D I dig it.

ahaha pretty sure not many people has an ubiquiti AP inside the sump section ahah

 

[chema]

Congratulations, what a terrific setup!. Your sump has been manufactured by Seadreams. I know the Spanish guy who does that work. I also have one of his sumps.

 

[PmRg]

Congratulations, what a terrific setup!. Your sump has been manufactured by Seadreams. I know the Spanish guy who does that work. I also have one of his sumps.

ahahha niceeee Raul is amazing!!! thank you so much :D

 

[Mike1970]

wow looks complicated :oops:

 

[PmRg]

wow looks complicated :oops:

it's alright since I installed and programmed eveything ahah

 

[reef fish]

Very nice

 

[reef fish]

What’s your schedule like and coloration on those g5 radion

 

[NabberNate]

So I guess I know who to PM for help understanding how to get into GHL products. It all seems very overwhelming. Nice tank! Those are Anthias right?

Copperband doesn't cause any trouble?

 

[JoshH]

Hello everyone,

here it is my full GHL setup, with the latest ION Director :D :D I will be posting measuring granphs after I have a few more tests done :)

Equipment:
GHL ProfiLux 4 Mega Set
1 GHL Power Bar 5.1
1 PLM-pH/Redox
1 Temp sensor
2 pH sensor
1 ORP sensor
1 Conductivity Electrode
1 GHL Touch Display
1 GHL Solenoid
1 GHL KH Director
1 GHL ION Director
4 GHL Doser 2.1
1 GHL Doser Maxi
1 GHL Optical Level Sensor
1 GHL Float Switch Level Sensor
1 GHL Leakage Sensor
1 GHL Sensor holder 1
1 GHL Level Sensor Holder Base Unit
1 GHL Level Sensor Fastener, angled
1 GHL Level Sensor Fastener
1 PropellerControl-2.1
1 GHL Gen 2 Propeller Breeze 6X

A few shots of the sump area:

.

Looks like an AWESOME setup! One tiny sugggestion... If you can it might be worth it to print or have someone print a plate to go between the ION Director and the doser below it, same with the KH Director... someone on here had his probe leak on his KH Director and it totally destroyed his dosers.

 

[PmRg]

What’s your schedule like and coloration on those g5 radion

Hello,

Using 100% in all colors, 55% schedule brightness and overall brightness 55% using Radion g5 blue that already has a perfect spectrum for my taste.

Pedro

 

[PmRg]

So I guess I know who to PM for help understanding how to get into GHL products. It all seems very overwhelming. Nice tank! Those are Anthias right?

Copperband doesn't cause any trouble?

Ahaha start with a Profilux mega set and you learn quickly, downloading the manual also helps... and there are lots of videos tutorials from GHL.

These are Pseudanthias Dispar.

Cooperband is very safe, sometimes it picks on the acans... but its fine.

Looks like an AWESOME setup! One tiny sugggestion... If you can it might be worth it to print or have someone print a plate to go between the ION Director and the doser below it, same with the KH Director... someone on here had his probe leak on his KH Direc

Thank you :) good idea.. can def print something, but never had any issues at all I've been using the KHD since the very beginning.

Pedro

 

[Tristren]

That looks amazing, thanks for sharing. id never seen a GHL Solenoid before. Looking online I see lots of European sites with them but not North American.

I don’t run a calcium reactor though so hadn’t looked into it.

cheers, Tony

 

[KStatefan]

Sure here it is:

ahaha pretty sure not many people has an ubiquiti AP inside the sump section ahah

Have you had any issues with the humidity giving problems for the AP? I use ubiquitity produts in my home.

What camera is that?

 

[PmRg]

Have you had any issues with the humidity giving problems for the AP? I use ubiquitity produts in my home.

What camera is that?

Hello,

No, because I have an extractor on the right side of the sump taking air out and an opening on the left side so new fresh air can come in.

The camera is a Dahua 3MP IP camera.

That looks amazing, thanks for sharing. id never seen a GHL Solenoid before. Looking online I see lots of European sites with them but not North American.

I don’t run a calcium reactor though so hadn’t looked into it.

cheers, Tony

Thank you so much, maybe there are only a 220v version of the solenoid. @Vinny@GHLUSA is this right?

Pedro

 

[Vinny@GHLUSA Verified Sponsor]

Thank you so much, maybe there are only a 220v version of the solenoid. @Vinny@GHLUSA is this right?

Pedro

Yes that is correct.