Gyre 150/130 IceCap Interface Modules

[LittleMaui]

Hello. I connected a Gyre 130 and 150 to 130 and 150 Icecap interface modules and used a Y cable to connect both to the 2016 Apex controller Variable Speed Port 1/2. I'm noticing that my 150 is only pulling 20 watts at 100%, whereas it use to run 31 on the OCE Gyre controller. Any ideas?

 

[scobeyra]

I had the same issue. It seems that the 130 and 150 aren't compatible as far as i can tell. When I had them both plugged in one would drop in intensity and the other wouldn't work at all.
Never found a fix so I sold my 130 and have another 150 coming to replace it

 

[LittleMaui]

I wondered if that might be the problem. Did you try plugging them into separate variable speed ports?

 

[scobeyra]

Yes I did. Also tried running them through 2 different ice caps

 

[rainbowreefer]

I reversed the y connector to at the pumps when I had this issue with my 2 250s. Not sure why but it worked.

 

[rainbowreefer]

I reversed the y connector to at the modules when I had this issue with my 2 250s. Not sure why but it worked.