Gyre 250 broken endcap replacement.

[Dondante]

Is this available for order?

 

[Twins Dragonz]

I think so. I saw on coralvue website. I believe it’s around $40 a set.

 

[Dondante]

Ouch. May be time to upgrade to a 350. Will one of my 250s run on the 350 controller?

 

[Twins Dragonz]

130/230 same, 150/250 same. 350 not sure if it’s comparable with 250 or not. Some expert can chime in for that. But I doubt it. If it’s then it’s comparable with 150 as well. Company don’t do that, they want to make money by making you buy new products.
Side note: if you are selling that 250, considering I get the first dibs

 

[csmaxspect]

130/230 same, 150/250 same. 350 not sure if it’s comparable with 250 or not. Some expert can chime in for that. But I doubt it. If it’s then it’s comparable with 150 as well. Company don’t do that, they want to make money by making you buy new products.
Side note: if you are selling that 250, considering I get the first dibs

Hi, we are sorry to tell you that 350 pump is not compatible to 250 controller. Because it is the upgraded version, and have some new functions, which means it needs a new controller different from 250 controller, The new functions Gyre 300 have is:
1st It is using Sine Wave Technology, making the pump's operation quieter than Gyre 200 series(It needs a new controller);
2nd It is allowing to use Gyre 330 and Gyre 350 pumps on the same Gyre 300 controller, though it needs to select the correct pump mode in advance.(It needs a new controller);
3rd It is able to use flow directors to direct the flow(It needs a new cage), because as you know, the cages of Gyre 200 series are not able to install the flow directors.
Please kindly check our website for your referrence,

Gyre 300 Series - Maxspect

maxspect

www.maxspect.com

 

[Dondante]

Hi, we are sorry to tell you that 350 pump is not compatible to 250 controller. Because it is the upgraded version, and have some new functions, which means it needs a new controller different from 250 controller, The new functions Gyre 300 have is:
1st It is using Sine Wave Technology, making the pump's operation quieter than Gyre 200 series(It needs a new controller);
2nd It is allowing to use Gyre 330 and Gyre 350 pumps on the same Gyre 300 controller, though it needs to select the correct pump mode in advance.(It needs a new controller);
3rd It is able to use flow directors to direct the flow(It needs a new cage), because as you know, the cages of Gyre 200 series are not able to install the flow directors.
Please kindly check our website for your referrence,

Gyre 300 Series - Maxspect

maxspect

www.maxspect.com

But if I buy a new 350 w Controller it will also run my old 250 pump until I can upgrade that one at a later date. Correct?

What about the part I need? Can I purchase just one?

 

[csmaxspect]

But if I buy a new 350 w Controller it will also run my old 250 pump until I can upgrade that one at a later date. Correct?

What about the part I need? Can I purchase just one?

Hi Sorry that Gyre250 pump is not able to run on Gyre 300 series controller either. Regarding the spare part, please feel free to head over to www.coralvue.com/support and submit a ticket. One of the reps there will be able to help you

 

[Twins Dragonz]

But if I buy a new 350 w Controller it will also run my old 250 pump until I can upgrade that one at a later date. Correct?

What about the part I need? Can I purchase just one?

According to his last paragraph, 300 controller can’t control 200 series pumps.
40$ for part, I’m not sure for each or pair. I believe it’s a pair but I could be wrong.

 

[Dondante]

Hi Sorry that Gyre250 pump is not able to run on Gyre 300 series controller either. Regarding the spare part, please feel free to head over to www.coralvue.com/support and submit a ticket. One of the reps there will be able to help you

Is this the part I need?

 

[csmaxspect]

Is this the part I need?

Hi thanks for your support. But you need to check it out with Coralvue, so as to avoid any possible misunderstanding. please feel free to head over to www.coralvue.com/support and submit a ticket. One of the reps there will be able to help you

 

[Twins Dragonz]

Is this the part I need?

That is 330/350. Check m with the reps to save your headache lol. 150/250 is above that and 39.99.

 

[Dondante]

That is 330/350. Check m with the reps to save your headache lol. 150/250 is above that and 39.99.

Oops. Didn't see that. Lockdown Bourbon tonight.

Of course it's the more expensive one. ‍♂

 

[CoralVue_Marketing]

Oops. Didn't see that. Lockdown Bourbon tonight.

Of course it's the more expensive one. ‍♂

The HYDROS WaveEngine can control all your Gyres. Were you able to get what you needed?

 

[Dondante]

The HYDROS WaveEngine can control all your Gyres. Were you able to get what you needed?

Jeff I haven't been able to look. I went to log in for a ticket and it didn't recognize my old account and I just gave up. Dealing with govt and employees trying to get paid right now because we are shut down. Been a rough couple of weeks. I'll try and jump back on and see if I can get logged on.

Thanks for checking.