Hammer not opening fully

blueridgereef

Active Member
View Badges
Joined
Mar 6, 2010
Messages
165
Reaction score
19
Location
Western NC
Rating - 0%
0   0   0
Hey. I recently[2-3 weeks ago], moved the entired contents of my 10 gallon over to the 6 gallon jbj nanocube I had sitting around for another project, because the lack of light[20 watts of PCs] was causing things to receed. Everything else is doing great[zoas, palys, torch, 'shroom, colt coral], but the two heads of hammer won't open all the way. All of the live rock, sand, and most of the water came from the ten, so the tank really hasn't had a cycle. Temp is fine, and params are normal, and I'm stumped. Any thoughts guys?
 

Speg

Valuable Member
View Badges
Joined
Jul 15, 2010
Messages
1,545
Reaction score
9
Location
Florida
Rating - 0%
0   0   0
I hate to sound like a nerd..but what is "fine" and what is "normal".

Is the hammer getting direct flow aimed at it or no flow? (how is the flow)

Did you bother checking ammonia? The water isn't what causes or helps avoid a cycle..it's the rock/sand and usually when you disturb sand or rock, you begin a cycle... May want to check the water and post results.
 
OP
OP
blueridgereef

blueridgereef

Active Member
View Badges
Joined
Mar 6, 2010
Messages
165
Reaction score
19
Location
Western NC
Rating - 0%
0   0   0
I hate to sound like a nerd..but what is "fine" and what is "normal".

Is the hammer getting direct flow aimed at it or no flow? (how is the flow)

Did you bother checking ammonia? The water isn't what causes or helps avoid a cycle..it's the rock/sand and usually when you disturb sand or rock, you begin a cycle... May want to check the water and post results.
Yup. Nitrite around 15 and Nitrates are about .5 .
the hammer is in the front left corner, the k. nano i've got in there for flow is just under the out spout/hole/thingie[back right corner]. so, lowest flow in the tank, but still not stagnant ;)
 
OP
OP
blueridgereef

blueridgereef

Active Member
View Badges
Joined
Mar 6, 2010
Messages
165
Reaction score
19
Location
Western NC
Rating - 0%
0   0   0
I hate to sound like a nerd..but what is "fine" and what is "normal".

Is the hammer getting direct flow aimed at it or no flow? (how is the flow)

Did you bother checking ammonia? The water isn't what causes or helps avoid a cycle..it's the rock/sand and usually when you disturb sand or rock, you begin a cycle... May want to check the water and post results.

nitrites, 15, nitrates, .5
fairly low, the k. nano is in the other corner of the tank, but it's pretty small so it's still not stagnant by any means.
 

Speg

Valuable Member
View Badges
Joined
Jul 15, 2010
Messages
1,545
Reaction score
9
Location
Florida
Rating - 0%
0   0   0
Nitrites must be zero...did you test ammonia? sounds like you're in a cycle.
 

Speg

Valuable Member
View Badges
Joined
Jul 15, 2010
Messages
1,545
Reaction score
9
Location
Florida
Rating - 0%
0   0   0
Those strips suck....dead serious :) I know they're way easy...but they're not accurate at all.

Do you have a decent LFS close to you where you could get your water tested soon? (not a PetCo)

Honestly, the first step to getting your hammer healthy is to find out what your problem is...to find out what your problem is, we need the numbers :)

Man, I sound nerdy..I'm sorry.
 

Reef lvr

Valuable Member
View Badges
Joined
Jan 16, 2010
Messages
1,213
Reaction score
3
Location
Eastern shore, md
Rating - 0%
0   0   0
Those strips suck....dead serious :) I know they're way easy...but they're not accurate at all.

Do you have a decent LFS close to you where you could get your water tested soon? (not a PetCo)

Honestly, the first step to getting your hammer healthy is to find out what your problem is...to find out what your problem is, we need the numbers :)

Man, I sound nerdy..I'm sorry.
I Agree 100%
 

TOP 10 Trending Threads

DO YOU THINK TECHNOLOGICAL ADVANCEMENTS ARE MORE HELPFUL OR HURTFUL TO REEFING?

  • More helpful.

    Votes: 19 34.5%
  • More hurtful.

    Votes: 3 5.5%
  • I think it depends mostly on the technology.

    Votes: 24 43.6%
  • I think it dependsmostly on the reefer behind the technology.

    Votes: 17 30.9%
Back
Top
Home
Post thread…
Market
What's new