Has anyone used a Kalk stirrer container for dosing phyto?

Peace River

Thrive Master
View Badges
Joined
Apr 29, 2014
Messages
25,006
Reaction score
174,220
Location
USA
What state or country do you live in
Florida
Rating - 100%
1   0   0
Have you ever used a kalk stirrer for something other than mixing and dosing kalk? Possible as a way to keep live foods such as phyto in suspension while it is waiting to be dosed?
 
Hydros pump, magnetic stirrer.
It's a work in progress.
 

Attachments

  • 20250721_225704.jpg
    20250721_225704.jpg
    66.9 KB · Views: 46
Funny enough, I am in the process of experimenting with a continuous phyto reactor. I used a Avast K2 Kalk stirrer for this purpose. The first thing I did was cover it with LED strip lights, and then shrink wrapped the whole reactor to prevent any water intrusion or movement of the lights.. You can see it in my sump here.
IMG_7640.jpg


Next, I replace out the probe connection with standard plumbing to be hooked up to my silent Hyger air pump.

IMG_7641.jpg


The other connection is connected to a UV light. I saw videos where people would boil water to sterilize it to prevent phyto crashes. Instead I am using a 25W UV light. I cannot run it continuous due to the slow feed rate so basically I batch in saltwater from my mixing tank using a DOS pump, run the UV light for a period of time to kill everything, then pump that over to the reactor, which then overfills and comes out the outlet line in to the sump and rinse and repeat.

IMG_7642.jpg


I got some Nano coming early next week and I will be testing the process to see how it works. Not sure if that is what your asking, but I think its a good idea to try.
 
Funny enough, I am in the process of experimenting with a continuous phyto reactor. I used a Avast K2 Kalk stirrer for this purpose. The first thing I did was cover it with LED strip lights, and then shrink wrapped the whole reactor to prevent any water intrusion or movement of the lights.. You can see it in my sump here.
IMG_7640.jpg


Next, I replace out the probe connection with standard plumbing to be hooked up to my silent Hyger air pump.

IMG_7641.jpg


The other connection is connected to a UV light. I saw videos where people would boil water to sterilize it to prevent phyto crashes. Instead I am using a 25W UV light. I cannot run it continuous due to the slow feed rate so basically I batch in saltwater from my mixing tank using a DOS pump, run the UV light for a period of time to kill everything, then pump that over to the reactor, which then overfills and comes out the outlet line in to the sump and rinse and repeat.

IMG_7642.jpg


I got some Nano coming early next week and I will be testing the process to see how it works. Not sure if that is what your asking, but I think its a good idea to try.
How did this end up going ?
 
I just dose phyto from the container it comes in. I put a magnetic stir bar into it on a timer to stir for a few minutes before and during dosing pump dosing. The whole contraption sits in a mini fridge above my last sump section and doses directly into it.

Seems to work great. I typically use Phyto Feast Live. I do it primarily to boost pods for my mandarin pair.
 
I just dose phyto from the container it comes in. I put a magnetic stir bar into it on a timer to stir for a few minutes before and during dosing pump dosing. The whole contraption sits in a mini fridge above my last sump section and doses directly into it.

Seems to work great. I typically use Phyto Feast Live. I do it primarily to boost pods for my mandarin pair.
This is what I did. Tank was small so I didn't need a large container. I dosed every hour 24/7 and had the stirrer set to run for five minutes before each dose. I was afraid the phyto would spoil being at room temp but it was my first time using phyto so maybe that isn't necessary?

PXL_20251007_224055771.jpg
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 2 11.1%
  • Lighting, pumps, or other major equipment

    Votes: 2 11.1%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 11.1%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 11.1%
  • Corals! Must...Have...CORALS!!!

    Votes: 5 27.8%
  • Fish or other livestock

    Votes: 0 0.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 5.6%
  • I’m browsing, but don’t have a specific target

    Votes: 2 11.1%
  • I’m not shopping for reef deals this year

    Votes: 1 5.6%
  • Other (Post in the comments)

    Votes: 1 5.6%
Back
Top
Home
Post thread…
Market
What's new