chipmunkofdoom2
Always Making Something
View BadgesExcellence Award
Article Contributor
Reef Squad Emeritus
This is more of a chemistry question than an aquarium question, but we have some pretty knowledgeable members, so I think I can still get some solid advice from the community.
I'm working on a side project and need some safety information regarding using and storing HCl. I can find lots of information with regards to HCl safety online. I understand that I need to wear eye protection and gloves at the very least, and work in a well ventilated area or hood. However, I plan to dispense a 0.1M HCl solution with a peristaltic dosing pump and have a few questions regarding this specific use case.
1. I'm going to store a container of 0.1M HCl close to the aquarium. A peristaltic dosing pump is going to dispense the solution on a schedule. I don't think I can completely seal the container or I'll create a vacuum when trying to pump the solution. At a concentration of 0.1M, would it be safe to create a small ventilation hole in the container so the pump does not create a vacuum? If this is not safe, how can I properly vent the fumes so that I can draw with a pump and not create a vacuum?
2. Will storing the HCl solution in an open or vented container lead to diminished potency over time? The concentration of the acid must be stable in order for my application to work.
3. Because I'm going to be dispensing the soultion with a peristaltic pump, I want to make sure the materials will resist corrosion from the acid. These pumps usually use soft silicone tubing and plastic barb fittings. At a concentration of 0.1M, do I need to be concerned with what type of silicone tubing is used, or what type of plastic is used to make the barbed connectors? If I do need to be concerned, could someone recommend some resources where I can obtain information regarding the chemical resistance of various types of tubing and connectors? There are resources online that list the compatibility of various types of plastic with HCl. But, most lists only cover HCl concentrations of 37% or higher. If my math is correct, this is 120 times more concentrated than the 0.1M solution I'll be using (37% HCl = about 12M, 12M / 0.1M = 120). I don't know if the same precautions are applicable for my application because the acid I am using is much more dilute.
Thanks in advance for the assistance!
I'm working on a side project and need some safety information regarding using and storing HCl. I can find lots of information with regards to HCl safety online. I understand that I need to wear eye protection and gloves at the very least, and work in a well ventilated area or hood. However, I plan to dispense a 0.1M HCl solution with a peristaltic dosing pump and have a few questions regarding this specific use case.
1. I'm going to store a container of 0.1M HCl close to the aquarium. A peristaltic dosing pump is going to dispense the solution on a schedule. I don't think I can completely seal the container or I'll create a vacuum when trying to pump the solution. At a concentration of 0.1M, would it be safe to create a small ventilation hole in the container so the pump does not create a vacuum? If this is not safe, how can I properly vent the fumes so that I can draw with a pump and not create a vacuum?
2. Will storing the HCl solution in an open or vented container lead to diminished potency over time? The concentration of the acid must be stable in order for my application to work.
3. Because I'm going to be dispensing the soultion with a peristaltic pump, I want to make sure the materials will resist corrosion from the acid. These pumps usually use soft silicone tubing and plastic barb fittings. At a concentration of 0.1M, do I need to be concerned with what type of silicone tubing is used, or what type of plastic is used to make the barbed connectors? If I do need to be concerned, could someone recommend some resources where I can obtain information regarding the chemical resistance of various types of tubing and connectors? There are resources online that list the compatibility of various types of plastic with HCl. But, most lists only cover HCl concentrations of 37% or higher. If my math is correct, this is 120 times more concentrated than the 0.1M solution I'll be using (37% HCl = about 12M, 12M / 0.1M = 120). I don't know if the same precautions are applicable for my application because the acid I am using is much more dilute.
Thanks in advance for the assistance!
