Heater question

Calireefer92

Well-Known Member
View Badges
Joined
Aug 7, 2018
Messages
653
Reaction score
189
Location
Corona
What state or country do you live in
California
Rating - 0%
0   0   0
hey reefer question about the
Eheim Jager TruTemp 300 Watt Fully Submersible UL Approved Heater I have a Red Sea 425 totally system is 112 gallons is the 300 watt to much for the tank or should I be good on the 300 and should I put it next to my return pump in the sump?
 
300w would be fine, but I would recommend going with two 150w heaters instead. And an Inkbird temperature controller would be ideal. Placing the heater in any area with good flow will be sufficient.
 
I personally would also go with 2 x 150w and then you have redundancy in case of one of them failing, and also less power to overheat the tank if the big one fails ‘on’ albeit unlikely

I’ve got 2 x 200w Eheim ‘s in my system connected to an aqua medic temperature controller and then finally controlled by Apex for a final switch off in the event of overheating

You can put it anywhere with good flow
 
I agree with all statements above.
Placement anywhere in good flow area.
Getting 2 or 3 heaters compared to just 1 backed by a controller will be the best strategy.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new