Heater size

I also have a 125 gal tank + 40 gal sump ... I use a 300 watt with inkbird control ... heater only turns on a few times a day and sometimes not at all...and the inkbird also turns on the fans to cool the tank....
So, ambient temp is the important factor... my tank uses fans more than heat. My temp has been plus or minus 1 degree for years. ... inkbird works great
 
I also have a 125 gal tank + 40 gal sump ... I use a 300 watt with inkbird control ... heater only turns on a few times a day and sometimes not at all...and the inkbird also turns on the fans to cool the tank....
So, ambient temp is the important factor... my tank uses fans more than heat. My temp has been plus or minus 1 degree for years. ... inkbird works great
I use a InkBird temp controller too and couldn’t be happier with it.
There are multiple factors that influence it including surface agitation and the amount of pumps and how hot those pumps get. I have a 100g tank in the same room as my 125 and it never needs the heater, I actually need to put a fan on it because it runs slightly hotter than what I’d like.
 
the "rule of thumb" is 3-5 watts per gallon (I always go for 5 watts per)
On a big tank like yours its best to break it up into 2-3 heaters
 
I also have a 125 gal tank + 40 gal sump ... I use a 300 watt with inkbird control ... heater only turns on a few times a day and sometimes not at all...and the inkbird also turns on the fans to cool the tank....
So, ambient temp is the important factor... my tank uses fans more than heat. My temp has been plus or minus 1 degree for years. ... inkbird works great
Thanks for the info
 
It would depend on several factors including ambient temp but in my 125 I use 600w of heaters (2 300 watt heaters).
I will be running maxspect f350 wave pumps
I use a InkBird temp controller too and couldn’t be happier with it.
There are multiple factors that influence it including surface agitation and the amount of pumps and how hot those pumps get. I have a 100g tank in the same room as my 125 and it never needs the heater, I actually need to put a fan on it because it runs slightly hotter than what I’d like.
I have two maxspect f350 that will be running.
 
I also have a 125 gal tank + 40 gal sump ... I use a 300 watt with inkbird control ... heater only turns on a few times a day and sometimes not at all...and the inkbird also turns on the fans to cool the tank....
So, ambient temp is the important factor... my tank uses fans more than heat. My temp has been plus or minus 1 degree for years. ... inkbird works great
Only one or two?
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 1 16.7%
  • Lighting, pumps, or other major equipment

    Votes: 2 33.3%
  • Controllers, testing, dosing, or automation gear

    Votes: 1 16.7%
  • Dry goods and restocks, like salt, media, or food

    Votes: 0 0.0%
  • Corals! Must...Have...CORALS!!!

    Votes: 0 0.0%
  • Fish or other livestock

    Votes: 0 0.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 16.7%
  • I’m browsing, but don’t have a specific target

    Votes: 0 0.0%
  • I’m not shopping for reef deals this year

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 1 16.7%
Back
Top
Home
Post thread…
Market
What's new