Heatsinks and LED Drivers FS

[marinelife]

I have 3 used
10.080" WIDE EXTRUDED ALUMINUM HEATSINK from heatsinkusa.com
Quality extruded aluminum heatsink
Width is 10.080"
Fin Height is 2.5"
Base Height is .375"
Length: 14"
Weight is approximately .99 lbs per inch
C/W/3": approximately .80

$75 each OBO plus shipping (about 14 pounds shipping wright)
Local Pickup available
They are over $90 each from http://www.heatsinkusa.com/10-080-wide-extruded-aluminum-heatsink/

They are drilled for 40 LEDs but you can always modify them for how ever many you want.


6 used Mean Well LPC-35-700 constant current drivers
Great for driving 1 string of 3-14 CREE XP-/XT- LEDs in series. Can also be used for XP-G and red/violet/UV LEDs.

700mA Constant current
9-48V
120-240V AC input
Epoxy encapsulated case
Short circuit / Over voltage / Over current protection
100% full burn-in test
50,000 hour MTBF
Full Specs: http://menarilighting.com/rapidled/documentation/LPC-35-SPEC.PDF

4 used Mean Well LPC-60-1050 constant current driver
For driving 1 string of 3~14 x 3W CREE XP-G LEDs in series.

1050mA constant current
9-48V
115-230V AC input
Epoxy encapsulated case
Short circuit / Over voltage / Over current protection
100% full burn-in test
50,000 hour MTBF
Full specs here: http://menarilighting.com/rapidled/documentation/LPC-60-SPEC.PDF

All the drivers have about 6 years of 6-8 hours a day use on them. They all have a power cord attached.

Mean Well LPC-60-1050 constant current drivers are $104 new asking $50 for all 4 OBO plus shipping
Mean Well LPC-35-700 constant current drivers are $90 new asking $45 for all 6 OBO plus shipping

Let me know if you have any question or offers.

 

[marinelife]

I will take offers on these, just let me know

 

[marinelife]

Drivers have been sold