Help me design a 300 gallon tank

  • Thread starter Thread starter mike_dani
  • Start date Start date
  • Tagged users Tagged users None

mike_dani

Well-Known Member
View Badges
Joined
Sep 13, 2009
Messages
765
Reaction score
12
Location
NE Huntsville
Rating - 0%
0   0   0
My fellow NARC membeers, I have finally made a decision on a tank upgrade ( from a 110 tall) it will be as follows....

300 gallon deep 72x36x27 starfire front glass reef ready
75 gallon sump baffles made by me
ATB 8.5 skimmer
drews dosing pumps with BRS 2 part
Pump??? thinking two mag 12's
Vortex mp40w 2 for now will look into more later
Currently have 2 each 250 w MH will need one more and a icecap 660 running 4 T-5's
Reef keeper lite will upgrade to an elite
GFO will be plumbed in but only ran if needed
Carbon in filter unit plumbed in only ran if needed
I will be adding 100-200 pounds of live rock as needed
enough sand for a 2-3 inch sand bed
and some arm extensions for that good old 36 inch deep tank, I am still trying to figure out if it might be better to go 30 inch so help me out.......Do any of you have a 36 in deep take if so would you do it again?

what am I missing here other than a bunch of coral..

My idea for this one is two pillars one on each half of the tank located in the middle with plenty of frag placeable rock with ledges connecting the two all of it will be held together using either PVC or fiberglass rods. This will serve me in two ways first and foremost the fish will have plenty of room to swim and I will only really need the two MH's I have uver the pillars and the rest for LPS or lowlight corals.

Please review and give em some feedback I am only in the planning stages and hope to be ordering the tank 2nd week in Feb. Between now and then it will be vortexs and skimmer and mag 12 all of the piece parts, I will need to get a stand and canopy made......
 
Sounds like a grand plan!

There is a new study out on the performance of various skimmers in advanced aquarists magazine:

Advanced Aquarist's Online Magazine - Feature Article: Further Studies on Protein Skimmer Performance

They tested scientifically a number of skimmers: EuroReef CS80, the Precision Marine ES100, the Precision Marine AP624, Bubble King Mini 160 needlewheel, Royal Exclusiv 170 Cone needlewheel, Octopus 150 recirc. and the ETSS Evolution 500.

They concluded "there are not compelling or remarkably large differences in measurable skimmer TOC removal metrics among the seven skimmers tested, although the Reef Octopus 150 consistently underperformed compared to the other skimmers."

Prices varied tremendously and the one that came on top in terms of performance was one of the cheaper ones.

As for the pump, you might consider pumps other than Mag drive pumps. Mag drives run hot and slow down a lot or seize up if not cleaned regularly due to calcium buildup. I'd go with two Eheim 1262 or a larger external pump.

For aquascaping with two islands, take a look at this progression shot:http://www.reefcentral.com/forums/showthread.php?t=1674294

In case that link disspears in a few minutes due to the address on the other board, it's in the current issue of reefkeeping online magazine. His tank size is not quite 300 gallon, but it is probably similar in scale.

I would also consider Lumenbright wide reflectors. After listening and talking with Dr. Sanjay Joshi last year during Nashville frag swap, I am convinced (or he convinced me) that Lumenbright reflector is the way to go for MH lighting. Here's his review on reflectors including Lumenbright. http://www.advancedaquarist.com/2009/1/review
 
Last edited:
Tomoko thank you for the great links... I have been reading all day and now my eyes and brain are fried......

I am going to end up with a 73X36X27 300 gallon tank, it will be Starfire on the front glass, eurobraced, and external overflow.

Here is a picture of a very similar tank
300 Picture.jpg


Now I need a good place to buy the new Lumenbright wide reflectors , I have 250 watt 14k hamiltons and have good growth now with my SPS on a 30 inch tank mounted 8 inches above the H20.....
lb_retrokit400w.jpg

Do I Need 400w on the Lumenbright wide reflectors on a 27 inch tank 8 inches obove the H20?
retro-kit spider.jpg

As of right now I am keeping my lighting the same with the Two 250's and 4 t-5's.


I will be adding two mp40w Vortecs now and maybe two later, as far as pumps I am going with a Reeflo Dart Pump.

I will have a 75 gallon sump with refugeium, skimmer, and frag tank all in one.

Please let me know what I am missing and this will all be ran with my RKL that I absolutely love......
 
Beginning to sound like 8Ball's tank except that he has those Sun tube skylight thingy to take advantage of the natural sunlight during the day.

I am not sure if you need 400W bulbs with Lumenbright on 27 inch tall tank. Sanjay told me in Nashville last year that I should be able to go with 175W bulbs instead of 250W that I was using on my 120 if I used Lumenbright. I was using a HQI ballast (M80) which makes bulbs burn brighter than an electronic ballast do. I suspect that I could have gone with 175W if I continued to use HQI ballasts. However, I opted for the electronic ballasts and 250W bulbs for my 180 since electronic ballasts are lot quieter (silent). 180 is 24 inches tall and 250W bulbs on electronic ballasts are bright enough. You might be able to get away with three 10,000K 250W bulbs on HQI ballasts and two VHO actinic supplement. I am a bit hesitant to use only two bulbs for 72 inches long tank. You will see two bright spots and a somewhat dark valley in the middle of the tank that way.
 
here is the drawing I sent to Ty for the tank....... I am getting getty with joy.


Tank-1.jpg
 
Last edited:
Tank is on order and a deposit has been made YAY
Reef Flow Dart pump is on its way, it will be here Friday
SWC 300A Skimmer will be here on Monday

Need to get built
Stand and Canopy soon.....

I am going to be waiting on the Vortech's as they are to darn expensive, I will stay with the Korillias and upgrade later.
 
I would make sure that you have enough head room above your skimmer to remove the skimmer cup for cleaning if your skimmer is an in-sump skimmer. A tall sump can create a problem there.
 
Go with a rimless starphire and come down in size that would be sick. I'm doing that shortly.
 
mattmike said:
Go with a rimless starphire and come down in size that would be sick. I'm doing that shortly.

I am an old school canopy guy so I will keep the size and canopy but thanks and I agree those with a rimless tank that keep it up is sick just not for me


Sent from my iPhone using Tapatalk
 
Tomoko Schum said:
I would make sure that you have enough head room above your skimmer to remove the skimmer cup for cleaning if your skimmer is an in-sump skimmer. A tall sump can create a problem there.

I am taking the sump and skimmer down to Ty so everything will fit nicely


Sent from my iPhone using Tapatalk
 
I suppose Ty is building your stand and canopy, too. I hope that your 75G sump is not too tall inside the stand. My sump that Ty built is a bit too tall for my skimmer. After I replaced by skimmer, I can no longer take out my skimmer cup in a normal manner unfortunately....
 
Hey Mike I would go ahead and have TY make the side starfire as well. Should not add too much at all. Also he builds a great stand as well.
 
The text inside the drawing states the length at 60". That is 5 feet. Also, if it were me I would have a door on the end of the stand to get a long sump in and out.
 
The text inside the drawing states the length at 60". That is 5 feet. Also, if it were me I would have a door on the end of the stand to get a long sump in and out.

Yes I have that planned, I am going to see Ty on Saturday and go over the stand and canopy design and to drop off the sump.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.7%
  • Fish or coral food

    Votes: 5 5.5%
  • Test kits or reagents

    Votes: 9 9.9%
  • Filter media or replacement fleece

    Votes: 5 5.5%
  • RO/DI filters or supplies

    Votes: 14 15.4%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.0%
  • I keep a backup of everything

    Votes: 24 26.4%
  • Other (Post in the comments)

    Votes: 7 7.7%
Back
Top
Home
Post thread…
Market
What's new