Help needed with phosphate result

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Johnny Searle

New Member
View Badges
Joined
Jun 15, 2020
Messages
1
Reaction score
0
Rating - 0%
0   0   0
Hi,

This is my first Icp test I’ve ever done and I’m very confused on the phosphate test result, can anyone help me because I’m confused if my phosphate is too high or is it too low!
Phosphorus measured 0.073
Total Phosphate measured 0.22

i have always tested Po4 with a Salifert test kit so I’m a bit confused looking at the results, I understand everything else I need to get in line but I’m struggling with the Phosphate for some reason!

Any help with it would be much appreciate.

Cheers
FECFEF2A-CB54-45D0-A38E-879CFB95DC45.jpeg
 

Fauna Marin

Well-Known Member
View Badges
Joined
Jul 13, 2012
Messages
603
Reaction score
211
Location
Germany
Rating - 0%
0   0   0
Hi,

This is my first Icp test I’ve ever done and I’m very confused on the phosphate test result, can anyone help me because I’m confused if my phosphate is too high or is it too low!
Phosphorus measured 0.073
Total Phosphate measured 0.22

i have always tested Po4 with a Salifert test kit so I’m a bit confused looking at the results, I understand everything else I need to get in line but I’m struggling with the Phosphate for some reason!

Any help with it would be much appreciate.

Cheers
FECFEF2A-CB54-45D0-A38E-879CFB95DC45.jpeg
HI
a ICP Machine detect the Element P and all Phosphorus which is in the water. The normal water tests detect only. Phosphate. ( Po4) to calculate the maximum available Po4 the detected Elemenot P will be multiplicate with 3,066. So the test showed that the level of Po4 is to high
 

Juniorh2r

Valuable Member
View Badges
Joined
Nov 11, 2018
Messages
1,149
Reaction score
923
Rating - 0%
0   0   0
Yes your phosphate is high anywhere between 0.05 to 0.10 is acceptable
 

Juniorh2r

Valuable Member
View Badges
Joined
Nov 11, 2018
Messages
1,149
Reaction score
923
Rating - 0%
0   0   0
Brightwell phosphate remover works great thats what I use
 

jeffmr4

Community Member
View Badges
Joined
Aug 4, 2016
Messages
80
Reaction score
31
Rating - 0%
0   0   0
Look at the reference range to see what is considered ok. Then look at your value and compare. They also use colors with the numbers so yellow is a little too high, red is too high and green is good. Black is within the reference range.
 

Fauna Marin

Well-Known Member
View Badges
Joined
Jul 13, 2012
Messages
603
Reaction score
211
Location
Germany
Rating - 0%
0   0   0
There are several possibilities to control the Po4 level in a Reef Tank. Before you use any Adsorber start to control your technic like skimmer and flow, The ammount and kind of food you add. If you have sand , change it step by step with new sand, Also check your PH Swing.
 

Creating a strong bulwark: Did you consider floor support for your reef tank?

  • I put a major focus on floor support.

    Votes: 28 40.6%
  • I put minimal focus on floor support.

    Votes: 17 24.6%
  • I put no focus on floor support.

    Votes: 22 31.9%
  • Other.

    Votes: 2 2.9%
Back
Top