Help noob

  • Thread starter Thread starter Vibrantg
  • Start date Start date
  • Tagged users Tagged users None

Vibrantg

New Member
View Badges
Joined
Sep 22, 2019
Messages
13
Reaction score
3
What state or country do you live in
South Dakota
Rating - 0%
0   0   0
I have a biocube 32 basically still new about a week/2 weeks old and the first few days was cloudy and now I have stuff in it that looks like dust particles? Is this normal ? Can only be seen with lid leds on
D4D514EF-10C4-461F-95DA-093120ADBE17.jpeg
 
If it is just a white cloudiness it is a bacterial bloom which is fairly common in a new tank. If it is literally just sand it typically settles on its own in time however the sand I buy comes with stuff to help with the cloudiness.

One freshwater tank I had I used sand and just kinda poured it on haphazardly and it was cloudy for like a week.
 
If it's dust (looks like dust) just blow it off the surfaces and keep rinsing your sponge out.
 
Did you rinse your sand?
 
Did you rinse your sand?
I did not but it was only cloudy for the first 1-3 days thn it cleared up and after putting another filter then it started with all this floating stuff btw saltwater tank if anyone is wondering. I have live sand and nutria-seawater if that helps? Rocks are dry live rocks cleaned before placing inside.
 
From your pic, it looks like you chose very fine sand, like sugar size. Is that correct?

If that wasn't rinsed, then you are going to have particles in the water for quite some time kicked up by the flow in the tank. It's likely that a lot of it settled in the filter area and was kicked up when you changed the filter media.

Try turning off all the pumps for an hour and see if it settles and clears up, that will give you the answer pretty quick.
 
If you dont think it is sand dust, then is it possible your filter had something in it? If not dust from sand or the filter then it could be a bacterial bloom.
 
From your pic, it looks like you chose very fine sand, like sugar size. Is that correct?

If that wasn't rinsed, then you are going to have particles in the water for quite some time kicked up by the flow in the tank. It's likely that a lot of it settled in the filter area and was kicked up when you changed the filter media.

Try turning off all the pumps for an hour and see if it settles and clears up, that will give you the answer pretty quick.
Yeah the sand is also the same brand the nutri live sand very fine stuff also has little shells in it came inside the sand
 
I've never heard of nutri.

You'll save yourself a lot of $ in a short time if you pick up a small RODI filter system and some salt, and make your own water. I can't imagine the long term costs of buying brand name premixed saltwater. Not to mention situations where you need a lot of new water right away, but don't have enough on hand.

Turn off the pumps for an hour and see what happens.
 
How old is the tank and what are your water parameters?
Got the tank back in August but didn’t feel it with water till last week. Nitrate/nitrite both at zero ph 7.5-8 kh 40-80 colors kinda off on kh that’s a mild guess
 
I've never heard of nutri.

You'll save yourself a lot of $ in a short time if you pick up a small RODI filter system and some salt, and make your own water. I can't imagine the long term costs of buying brand name premixed saltwater. Not to mention situations where you need a lot of new water right away, but don't have enough on hand.

Turn off the pumps for an hour and see what happens.
My bad natures ocean sand. And I’ll definitely try turning it off for awhile see what comes up
 
Yea it’s the only thing my store had in stock. Is their better ones out their?

Yes. Invest in a Hanna Checker Alk, Calcium, and low range phosphate tester. One of the best buys I have purchased for testing. Easy, quick, and accurate. 40-80 is a crazy high number for Alk. Test kit is more than likely off or wrong. Alk/dKh needs to be between 8-12. I would stick around 8-9 and keep it stable.

More than likely your water is cloudy from the sand and the rocks. The dry rocks will keep your water like that for a couple weeks. Keep your tank clean, water changes, and change filter every couple weeks and it will clear up.
 
Yea it’s the only thing my store had in stock. Is their better ones out their?

Definitely. API is perfectly fine for starting out, but consider salifert as the next step up when you're ready. But don't worry about that for now.
Work on your water clarity problem, let things cycle and look into your own water production solution.

If you're buying stuff from a generic pet store, it would be a good idea to look around and see if there are reef or at least aquarium specific shops that you can get to.
 
Welcome to the hobby and to reefing! Red Sea or Salifert are both good test kits. Also Hannah checkers are a popular alternative
 
Yea it’s the only thing my store had in stock. Is their better ones out their?
I’ll definitely look into that kit since the colors on this api kit is just terrible on reading half the things
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 4 14.8%
  • Lighting, pumps, or other major equipment

    Votes: 4 14.8%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 7.4%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 7.4%
  • Corals! Must...Have...CORALS!!!

    Votes: 7 25.9%
  • Fish or other livestock

    Votes: 1 3.7%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 3.7%
  • I’m browsing, but don’t have a specific target

    Votes: 4 14.8%
  • I’m not shopping for reef deals this year

    Votes: 1 3.7%
  • Other (Post in the comments)

    Votes: 1 3.7%
Back
Top
Home
Post thread…
Market
What's new