Help with Apex feed mode.

[Hiroshii]

I moved my tank last Saturday and I moved both of my apex controllers (EB832_2) and hooked everything back up. Ever since the WAV powerheads don't stop when I press "FeedA" I've programed it numerous time to "If FeedA 005 Then Off" None of the 4 WAV shuts off. 2 of them are stuck on 100% even though I've copied the other 2 WAV program to them. Is there something I am missing? Everything was fine before I moved the tank. If anyone cold help I would greatly appreciate it.

 

[Hiroshii]

 

[SuncrestReef]

Are you certain the WAVs are assigned the same AquaBus addresses after reconnecting everything? They should retain their addresses, but that would be the first thing I check. Go into your list of Modules to see if there are any WAVs listed as Disconnected, with new WAVs listed on new addresses. That would explain why the programming on the old (disconnected) outputs isn't working.

Also take a look at the System View to see the current output names:
https://www.reef2reef.com/ams/apex-system-view.818/