How frequently do you change your carbon?

I changed my ROX carbon after 2-4 weeks. After that, the carbon gets coated in bacteria whether it is occupied by organics or not.
 
I too am running a BRS dual reactor, setup as parallel flow (not series), both canisters loaded with 3 parts ROX carbon to 1 part GFO. If my weekly PO4 readings exceed 0.05 then I change them both. Otherwise I change them monthly. My system has a working volume of 260 gallons.
 
I use the reactor that's built into my Geo sump.
 
I use supernova carbon and change it every two months. When I used ROX 0.8 I change that monthly as well. This carbon is seeded per the company with appropriate bacteria and enzymes that will help break down organics that could bog down the carbon. What I have found is that even after two months still doing a great job and the water is crystal clear but I still change anyway because that's manufacturers recommendations.
Interesting they market that. I believe its just that. Usually its suggested to change your GAC with in a month because the GAC will get covered in bacteria reducing its effectiveness. Plus, GAC should not be tumbled and once coated with bacteria becomes "clumpy" which again reduces its effectiveness.

Fluidized filters like sand or bio-pellets that would be useful.
 
That is really convenient having the reactor built into the sump. What size heater does the Geo Sump you have hold?
I have 2 300 watt heaters on it. Far more than I need though.
 
Interesting they market that. I believe its just that. Usually its suggested to change your GAC with in a month because the GAC will get covered in bacteria reducing its effectiveness. Plus, GAC should not be tumbled and once coated with bacteria becomes "clumpy" which again reduces its effectiveness.

Fluidized filters like sand or bio-pellets that would be useful.
You don't tumble carbon, GFO yes, but not carbon.
 
I use KZ carbon in a zeolite reactor shaken daily.
 
I change carbon every 3-4 weeks. The BRS ROX and fancier carbon is nice, but I'm not sure it's worth the money. I always rinse the carbon carefully in the reactor to remove the fines and ensure I'm not dumping any debris in the sump. I usually run cheap Marineland carbon.

You also may be able to determine when the carbon becomes "clogged" and flow decreases through your reactor. I have mine setup in a single reactor with 2/3 carbon packed so as not to move, but GFO above that tumbles. I judge flow rate by the amount of tumbling and replace carbon when it goes down or 4 weeks has passed.

BulkReefSupply did some interesting experiments around the effectiveness of media bags vs. reactors and different types of carbon: http://www.bulkreefsupply.com/video/view/week-24-carbon-gfo-filter-media-clean-stable-reef-tank/

This is why I use a cheap media reactor and basic carbon, should deliver 90% of the value of expensive carbon and expensive reactors. If you're running expensive carbon without a reactor, shelling out for a proper reactor is more valuable than paying for premium carbon material, IMHO.
 
BRS Rox.. 3/4 cup 24/7 and change out once a month unless I suspect something is wrong. It's pretty much all used up, I believe, after 3 days it's introduced.
 
ROX 8 every 3-4 weeks depending on color of water and corals.
 

TOP 10 Trending Threads

WHAT’S THE HARDEST PART OF REEFING TO EXPLAIN TO A NON-REEFER?

  • Why a tiny coral frag can cost that much

    Votes: 24 30.4%
  • Why I spend time testing and adjusting water

    Votes: 11 13.9%
  • Why the fish I want might not fit my tank

    Votes: 12 15.2%
  • Why I have buckets, tubing, and salt around the house

    Votes: 4 5.1%
  • Why corals are living animals, not decorations

    Votes: 20 25.3%
  • How much time and attention a reef takes

    Votes: 23 29.1%
  • The difference between freshwater and saltwater creatures

    Votes: 4 5.1%
  • I’ve stopped trying to explain

    Votes: 23 29.1%
  • Other (Post in the comments)

    Votes: 10 12.7%
Back
Top
Home
Post thread…
Market
What's new