How to improve lifespan of filter roller

wouterdu

New Member
View Badges
Joined
Aug 14, 2024
Messages
7
Reaction score
1
Location
belgium
What state or country do you live in
Other International
Rating - 0%
0   0   0
Hi,

I currently have a medium filter roller from bubble magus and while it’s doing it’s job i have to replace the roll every 2 weeks while i read online some can do months with their roll.

What actions can i do to improve the lifespan of a roll?
Do i look to get a larger unit that’s oversized or turn down the water valve (letting more water pass next to the filter).

The roll itself is quite dirty so it’s doing it’s job but i’ll soon go on holiday for 3 weeks so hoping to do a quick fix.

IMG_6533.jpeg
 
considering it seems you have a filter roller and TWO skimmers. why not invest in a smarter reefs 2-in-1 skimmer/filter roller? you could have room for other things in the sump like UV, refugium, etc(if you don't have those already)
 
considering it seems you have a filter roller and TWO skimmers. why not invest in a smarter reefs 2-in-1 skimmer/filter roller? you
could have room for other things in the sump like UV, refugium, etc(if you don't have those already)

Bit messy but this is my sump right now with the refugium in th emiddle, the uv is not on the picture but is below the alkatronic (although it's quite undersized)

i noticed the smarter reefs skimmer as well but since i got drains on the skimmers i was thinking more in the line of an oversized filter roller in the hopes of the roll lasting a huge time while still filtering "good"( or was even thinking of adding a 2nd roller matter and splitting the water between the 2 but i'm not sure if that'll prolonge the rolls and how i'm gonne fit that lol).

1724271324744.png
 
How long has it been in the sump?
If your tank is fed really well it will have an effect on the roller.
It's doing the job as you can see by the color of the roll.
It may just take time for everything in the water column to cleaned so there is less to be filtered out.
 
the tank was moved 1 month ago so the roller filter has been +- 4 weeks active ( i replaced it new when it started did it after 2 weeks and today again).

i do feed with an autofeeder 4 times a day to prevent manual overfeeding ( it's almost instantly gone the second it hits the water).
 
You can lower the amount of water going through it
 
Less fish?







Sorry, that is blasphemy..
I'll see myself out..
while i’m thinking? It’s currently not overstocked i am more wondering if a larger unit would be a ‘solution’ as well. Not saying i want to add more fish but i do want to see them grow larger so their waste will only get worse (though corals will grow as well so hopefully they will filter a bit out as well)
 
slow down the flow through the roller... it will take a higher load of detritus per square foot before the water rises and trips the roller.
 
Cut flow rate or bigger filter roller. I use a Aqua Maxx medium, same as the bubble magus medium and I get 8-12 weeks per roll on a heavily stocked 120g with a 25g sump. Ime most reefers run a high as hell turnover rate and it's not needed.
 
Thanks for the tips i’ll turn down the pump a bit i’m currebtly at 85% for a 10.000l pump (tank is around 600liters with sump in) so i guess i can lower it to 60% and still have 10x the volume ( though realisticly lets say 8 to 9)
 

WHICH KIND OF INVERT HAS CAUSED THE MOST MISCHIEF IN YOUR TANK?

  • Sea urchins

    Votes: 16 23.9%
  • Hermit crabs

    Votes: 11 16.4%
  • Other crabs

    Votes: 4 6.0%
  • Shrimp

    Votes: 6 9.0%
  • Snails or conchs

    Votes: 3 4.5%
  • Sea stars

    Votes: 0 0.0%
  • Anemones

    Votes: 12 17.9%
  • None! My inverts are model citizens. :-)

    Votes: 11 16.4%
  • Something else (tell us in the comments)

    Votes: 4 6.0%
Back
Top
Home
Post thread…
Market
What's new