How to read the redsea kit. Help

[James5214]

So I purchased the multi test kit foundation pro Redsea and I tested alkalinity and just tested magnesium. If I am reading this my levels are way way low. Can somebody assist with this and tell me if I'm reading correct or wrong. Thanks. It says titrant used .80 1600ppm so does that mean if I used only .2 and there is .8 left in the 1ml syrine that's my reading or is it other way around? If I used .8 and I have only .2 left in the syringe that's my levels? I have about .16ml left in my syringe when it turned from the pink to the blue so I'm guessing my levels are below 760 correct because it says titrant used .38 760 ppm? Help please lol

 

[fishynate]

It looks like you have closer to .18 left (reading from the plunger, not the fluid level/meniscus.)
That means you used .82. You are just off the top of the chart (so, a little above 1600 Mg)

 

[chris k.]

The way i do it is when i fill the syringe i put the black plunger at 1.0. Then in your picture it would be at .2. So i used .80 titrant. For a reading of 1600

 

[James5214]

Ok thanks for clearing that up for me. Didn't know how to read that. So I need to lower my mag and my alkalinity.

 

[Randy Holmes-Farley]

The Red Sea magnesium kit seems more prone to issues than most magnesium kits, which in general are not, IMO, very reliable.

There's no scenario aside from an overdose, where magnesium is higher than your starting salt mix, so I would not look to try to lower it. Personally, I'd ignore it.

 

[James5214]

Ok thanks. I need to redo my alk test ad I read it wrong thought my alk was below 5 lol and will be doing calcium test when lights come on in a few hours