how to set the virtual outlet for apex to auto ?
- Thread starter David Cher
- Start date
- Tagged users None
Mastiffsrule
Where ever you go, there you are, so be nice 2 you
Brett S
Valuable Member
- Joined
- Nov 28, 2016
- Messages
- 1,062
- Reaction score
- 1,353
- Location
- Orlando
- What state or country do you live in
- Florida
If you manually put an outlet (virtual or otherwise) in ON or OFF you can’t use a program to change it back to AUTO. ON and OFF are manual overrides that cannot be overridden by a program.
Instead you can adjust the program for the top off and email alert so they turn off while feed mode is active.
For example you could add the following line to the bottom of the program for each of those outlets. In that case it would shut them off during the FeedA feed mode and not turn them back on until 5 minutes after the feed mode had finished.
Instead you can adjust the program for the top off and email alert so they turn off while feed mode is active.
For example you could add the following line to the bottom of the program for each of those outlets. In that case it would shut them off during the FeedA feed mode and not turn them back on until 5 minutes after the feed mode had finished.
Code:
If FeedA 005 Then OFF
Similar threads
