HUGE SALT MYSTERY!!!!!!!

EASTERN INDIGO

Active Member
View Badges
Joined
Aug 7, 2020
Messages
123
Reaction score
34
Location
ocala
What state or country do you live in
Florida
Rating - 0%
0   0   0
MY 210 ANEMONE TANK WITH ONLY TWO SMALL FISH IS SHOWING A SALINITY OF 1.029. THE LAST TIME I CHANGED WATER WAS ABOUT TWO MONTHS AGO IT REGISTERED 1.026. I HAVE AN ATO WHICH SHOULD KEEP IT STABLE. TODAY IT IS AT 1.029. THE ATO WATER IS RODI READING CLOSE TO ZERO. I HAVE MILD SALT CREEP, BUT THAT SHOULD LOWER SALINITY. HOW CAN I POSSIBLY HAVE 1.O29? OH, AND I CHECKED MY MILWAUKEE METER AND IT IS DEAD ON 1026 OR 1025 DEPENDING ON WHICH TEST SOLUTION I USE. SO HERE IS MY QUESTION: ??????????????????????????????????????????????????????????
 
On its best day the Milwaukee MA887 Digital Salinity Refractometer has a rated accuracy of ±2 PSU, ±2 ppt, and ±0.002 S.G.

Consumer calibration solutions are notoriously inaccurate, so dead on is really ballpark.

I’ve owned to MA877 and both are in the garbage dump. But one way or the other, the starting point is a reliable standard.

I recommend making a batch of Randy’s standard.
https://www.reef2reef.com/ams/reef-aquarium-salinity-diy-calibration-standards.956/
 
On its best day the Milwaukee MA887 Digital Salinity Refractometer has a rated accuracy of ±2 PSU, ±2 ppt, and ±0.002 S.G.

Consumer calibration solutions are notoriously inaccurate, so dead on is really ballpark.

I’ve owned to MA877 and both are in the garbage dump. But one way or the other, the starting point is a reliable standard.

I recommend making a batch of Randy’s standard.
https://www.reef2reef.com/ams/reef-aquarium-salinity-diy-calibration-standards.956/
THANK YOU. I HAVE USED THAT MONITOR FOR YEARS, AS WITH EVERY OTHER TANK, I STARTED THIS ONE WITH 26. FROM THERE I ALWAYS COMPARE MY NEW WATER WITH THE TANK, NEVER SUSPECTING THE MONITOR BECAUSE I ALWAYSW CALIBRATE. WHEN I HAVE TIME LATER I WILL READ THE ENTIRE LINK AND IF I AM CAPABLE I WILL DO IT. DO YOU HAVE A RECOMMENDATION FOR A BETTER MONITOR? I HATE THE REFRACTOMETERS BECAUSE THEY ARE DIFFICULT TO READ, AND EVEN WITH THEM THEY ARE ONLY AS GOOD AS THEIR CALIBRATION, AND THEY CAN BE OFF ALSO. MAYBE I SHOULD BUY STOCK IN MORTON SALT, HUH?
 
1795372844456.gif
 
On its best day the Milwaukee MA887 Digital Salinity Refractometer has a rated accuracy of ±2 PSU, ±2 ppt, and ±0.002 S.G.

Consumer calibration solutions are notoriously inaccurate, so dead on is really ballpark.

I’ve owned to MA877 and both are in the garbage dump. But one way or the other, the starting point is a reliable standard.

I recommend making a batch of Randy’s standard.
https://www.reef2reef.com/ams/reef-aquarium-salinity-diy-calibration-standards.956/
THANK YOU. I HAVE USED THAT MONITOR FOR YEARS, AS WITH EVERY OTHER TANK, I STARTED THIS ONE WITH 26. FROM THERE I ALWAYS COMPARE MY NEW WATER WITH THE TANK, NEVER SUSPECTING THE MONITOR BECAUSE I ALWAYSW CALIBRATE. WHEN I HAVE TIME LATER I WILL READ THE ENTIRE LINK AND IF I AM CAPABLE I WILL DO IT. DO YOU HAVE A RECOMMENDATION FOR A BETTER MONITOR? I HATE THE REFRACTOMETERS BECAUSE THEY ARE DIFFICULT TO READ, AND EVEN WITH THEM THEY ARE ONLY AS GOOD AS THEIR CALIBRATION, AND THEY CAN BE OFF ALSO. MAYBE I SHOULD BUY STOCK IN MORTON SALT, HUH?
No need to read the whole thing. You only need the refractometer standard.

Get a precise scale, some NaCl (sodium chloride / table salt) and weigh out 3.65g. Dissolve it in 93.35mL RO/DI. This yields a fitting solution at 25°C/77°F which you should be able to use to calibrate your meter.

From the source:
"This 3.65 weight percent sodium chloride solution can be made by dissolving 3.65 grams of sodium chloride in 96.35 grams (mL) of purified fresh water. That amount roughly corresponds to ¼ cup (73.1 g) of Morton's Iodized Salt dissolved into 2 liters (2000 g) of water (giving very slightly more than 2 L of total volume)."

If you need a specific standard or two standards for the calibration, let me know what you need exactly. I have access to the required material to calculate how you can mix those.


My overall recommendation: Just get a glass hydrometer like the Tropic Marin one. It's more than enough for the hobby and the calibration can't be messed up as it doesn't really lose it's factory calibration. As long as you measure water close enough at 25°C/77°F your readings will be fine and repeatable, which arguably is the most important factor.
 
Last edited:

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 26 23.2%
  • I’d trust someone who knows my tank to choose

    Votes: 10 8.9%
  • I’d rather get a gift card and pick it myself

    Votes: 45 40.2%
  • I’d prefer gear or supplies instead

    Votes: 3 2.7%
  • Please don’t surprise me with livestock

    Votes: 28 25.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new