ICP Test Result?

  • Thread starter Thread starter tmccaff
  • Start date Start date
  • Tagged users Tagged users None

tmccaff

Well-Known Member
View Badges
Joined
Jan 15, 2014
Messages
800
Reaction score
190
Location
New Jersey
Rating - 0%
0   0   0
I have gotten back my results and have presence of Chlorine at 20531 ppm is this mean my ROFILTER Carbons may need to be changed? I am curious why so high or is this high?
 
You’ll probably need to add clorimine blasters to your system . I run a RODI system with two clorimine blasters and a silicate canister on top of pre filter , two membranes , and two DI . It’s also important to circulate the make up water for at least 24 - 48 hours with a pump and possibly airstone to agitate the surface for proper gas exchange . Test your water for chlorimines before you use the water for your water change . I buy my equipment and refilled from Aquafx in winter park , Florida. Ask for jeromy and tell him the results of your water test . I like using them because they are very knowledgeable and don’t just sell you stuff to make a sale . Their pricing is in line with everyone else . You can look them up on line . Hope that helps . :cool:
 
Last edited:
I have gotten back my results and have presence of Chlorine at 20531 ppm is this mean my ROFILTER Carbons may need to be changed? I am curious why so high or is this high?
Chlorine or Chloride?

Chloride is a normal part of seawater and about 20,000ppm is normal.
 
Chlorine or Chloride?

Chloride is a normal part of seawater and about 20,000ppm is normal.
I didn’t think about the fact that they misreading the test . That could make more sense , good catch !! . The municipality where I live dumps chlorine to high levels once or twice a month but never that high . Usually can smell it when they do it . When they do I wait a week to make water . :cool:
 
That is my results

Screenshot 2023-06-06 at 6.33.01 AM.png
 
You’ll probably need to add clorimine blasters to your system . I run a RODI system with two clorimine blasters and a silicate canister on top of pre filter , two membranes , and two DI . It’s also important to circulate the make up water for at least 24 - 48 hours with a pump and possibly airstone to agitate the surface for proper gas exchange . Test your water for chlorimines before you use the water for your water change . I buy my equipment and refilled from Aquafx in winter park , Florida. Ask for jeromy and tell him the results of your water test . I like using them because they are very knowledgeable and don’t just sell you stuff to make a sale . Their pricing is in line with everyone else . You can look them up on line . Hope that helps . :cool:
What you use to test your water for chlorimines?
 
That is my results

Screenshot 2023-06-06 at 6.33.01 AM.png
Those results are pretty much okay, although I don't
know why Vanadium is elevated

Your phosphates are low and you should increase with more feeding or dosing some Phosphate.

You may wish to consider a trace element mix.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new